Design and Experiment for a Single-Degree-of-Freedom Four-Bar Planting Manipulator
Actuators · 04.04.2026 · 15 (4) · 207
DOI: 10.3390/act15040207 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 04.04.2026. Verfasst von Yugong Dang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Research Project of Henan Province, Henan University of Science and Technology.
Abstract (Originalsprache)
At present, commonly used vegetable pot seedling planters can be divided into two categories: one has a complex structure and high manufacturing cost, and the other has a simple structure but poor planting quality. In order to solve this problem, an open-hinge four-bar-mechanism planting manipulator is designed, which has many advantages, such as a simple structure, strong force transfer performance, and the ability to achieve complex trajectory curves. The physical characteristics of pot seedlings are measured; this provides a basis for the structural and dimensional design of the planter and the shape design of the duckbill. According to the analysis of the planting process, the design requirements of the planting mechanism are formulated. The motion path of the mechanism and the motion of each pair are planned and designed; a planetary gear train is used to restrain the rotating pair consisting of connecting rod 1 and connecting rod 2; a cam high pair mechanism is used to restrain the rotating pair consisting of connecting rod 2 and connecting rod 3; and a cam linkage mechanism is used to control the opening and closing action of the duckbill. Finally, a single-degree-of-freedom fully mechanical planting mechanism is designed. The experimental results show that the trajectory of the initial soil entry point of the planting mechanism is consistent with the design requirements and theoretical simulation results. In the transplanting experiment, the rate of qualified planting erectness was 94.79%, among which the rate of excellent planting erectness was 92.45%, and the mechanism has high reliability. The design of this mechanism offers a fully automatic pot seedling planting method, which can provide a reference for research on the full automation of transplanting equipment.
Förderung
- National Natural Science Foundation of China
- Science and Technology Research Project of Henan Province
- Henan University of Science and Technology
Zitieren
APA
Dang, Y., Jiang, G., Zhang, Y., & Zhou, Z. (2026). Design and Experiment for a Single-Degree-of-Freedom Four-Bar Planting Manipulator. Actuators, 15(4), 207. https://doi.org/10.3390/act15040207
Vancouver
Dang Y, Jiang G, Zhang Y, Zhou Z. Design and Experiment for a Single-Degree-of-Freedom Four-Bar Planting Manipulator. Actuators. 2026;15(4):207. doi:10.3390/act15040207
BibTeX
@article{Dang2026,
author = {Dang, Yugong and Jiang, Gaohang and Zhang, Yupeng and Zhou, Zhigang},
title = {Design and Experiment for a Single-Degree-of-Freedom Four-Bar Planting Manipulator},
journal = {Actuators},
year = {2026},
volume = {15},
number = {4},
pages = {207},
doi = {10.3390/act15040207}
}
EUVIMED