Design and Analytical Modeling of a Unidirectional Series Elastic Actuator with Tension-Spring-Based Rotational Stiffness Mechanism
Actuators · 25.03.2026 · 15 (4) · 180
DOI: 10.3390/act15040180 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 25.03.2026. Verfasst von Deokgyu Kim und 2 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yeungnam University Research Grant.
Abstract (Originalsprache)
This study proposes a tension-spring-based unidirectional rotational stiffness mechanism (TS-URM) and its implementation in a Unidirectional Series Elastic Actuator (USEA). Unlike conventional bidirectional rotary SEAs, the proposed design is structurally optimized for unidirectional torque transmission, improving deformation utilization efficiency in pulling-type applications. An analytical model was derived to establish the geometric relationship between spring elongation and rotational deformation, enabling explicit formulation of the torque–angle relationship. The influence of the installation angle on stiffness linearity was systematically analyzed, and a multilayer spring configuration was optimized to achieve a target rotational stiffness of approximately 42 Nm/rad. A preload adjustment mechanism was incorporated to eliminate nonlinear behavior in the initial operating region. Experimental results validated the analytical model and demonstrated stable unidirectional force control up to 130 N with steady-state errors within 1 N. The proposed mechanism provides predictable stiffness characteristics and an efficient structural solution for compact USEA systems.
Förderung
- Yeungnam University Research Grant
Zitieren
APA
Kim, D., Lee, J., & Lee, C. (2026). Design and Analytical Modeling of a Unidirectional Series Elastic Actuator with Tension-Spring-Based Rotational Stiffness Mechanism. Actuators, 15(4), 180. https://doi.org/10.3390/act15040180
Vancouver
Kim D, Lee J, Lee C. Design and Analytical Modeling of a Unidirectional Series Elastic Actuator with Tension-Spring-Based Rotational Stiffness Mechanism. Actuators. 2026;15(4):180. doi:10.3390/act15040180
BibTeX
@article{Kim2026,
author = {Kim, Deokgyu and Lee, Jiho and Lee, Chan},
title = {Design and Analytical Modeling of a Unidirectional Series Elastic Actuator with Tension-Spring-Based Rotational Stiffness Mechanism},
journal = {Actuators},
year = {2026},
volume = {15},
number = {4},
pages = {180},
doi = {10.3390/act15040180}
}
EUVIMED