EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transient Energy Conversion and Compressed Air Recovery in Pneumatic Systems: Optimization and CFD-Based Analysis

Andrii Rogovyi, Yuriy Romasevych, Mariana Stryzhak, Ruslan Kryvobok, Gennady Krutikov, Serhiy Iglin

Actuators · 27.02.2026 · 15 (3) · 135

DOI: 10.3390/act15030135 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 27.02.2026. Verfasst von Andrii Rogovyi und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Technical University “Kharkiv Polytechnic Institute”.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Pneumatic drives remain widely used in industrial automation due to their simplicity and reliability, yet their overall energy efficiency is typically low. This study introduces an energy-efficient pneumatic drive concept that enhances braking control and enables compressed air recovery without modifying the actuator’s mechanical design. A transient one-dimensional mathematical model is developed to describe system dynamics and is combined with a particle swarm optimization (PSO) algorithm to determine optimal switching coordinates for the braking phase under constraints on piston motion and positioning accuracy. To assess the validity and limitations of simplified models, the optimized process is additionally investigated using a three-dimensional CFD model with moving mesh and valve control. The CFD model is validated experimentally using pressure measurements in the cylinder chambers. The results reveal that conventional isothermal 1D models underestimate transient pressure and energy parameters by up to 30–35% in systems with air recovery, highlighting the necessity of 3D analysis for accurate energy assessment. Optimization increases the duration of the recovery phase by a factor of 2.8 while maintaining cycle time and improving positioning accuracy. The resulting cycle energy efficiency reaches 53.4%, significantly exceeding typical industrial values. The proposed methodology provides a practical framework for designing energy-efficient pneumatic drives.

Förderung

  • National Technical University “Kharkiv Polytechnic Institute”

Zitieren

APA

Rogovyi, A., Romasevych, Y., Stryzhak, M., Kryvobok, R., Krutikov, G., & Iglin, S. (2026). Transient Energy Conversion and Compressed Air Recovery in Pneumatic Systems: Optimization and CFD-Based Analysis. Actuators, 15(3), 135. https://doi.org/10.3390/act15030135

Vancouver

Rogovyi A, Romasevych Y, Stryzhak M, Kryvobok R, Krutikov G, Iglin S. Transient Energy Conversion and Compressed Air Recovery in Pneumatic Systems: Optimization and CFD-Based Analysis. Actuators. 2026;15(3):135. doi:10.3390/act15030135

BibTeX
@article{Rogovyi2026,
  author = {Rogovyi, Andrii and Romasevych, Yuriy and Stryzhak, Mariana and Kryvobok, Ruslan and Krutikov, Gennady and Iglin, Serhiy},
  title = {Transient Energy Conversion and Compressed Air Recovery in Pneumatic Systems: Optimization and CFD-Based Analysis},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {3},
  pages = {135},
  doi = {10.3390/act15030135}
}
Kostenlos starten →