Autonomous Locomotion and Embedded Trajectory Control in Miniature Robots Using Piezoelectric-Actuated 3D-Printed Resonators
Actuators · 01.01.2026 · 15 (1) · 23
DOI: 10.3390/act15010023 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 01.01.2026. Verfasst von Byron Ricardo Zapata Chancusig und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Universidad de Castilla-La Mancha, Spain, Universidad Politécnica Salesiana, Quito-Ecuador.
Abstract (Originalsprache)
This article presents the design, fabrication, and experimental validation of a centimeter-scale autonomous robot that achieves bidirectional locomotion and trajectory control through 3D-printed resonators actuated by piezoelectricity and integrated with miniature legs. Building on previous works that employed piezoelectric bimorphs, the proposed system replaces them with custom-designed 3D-printed resonant plates that exploit the excitation of standing waves (SW) to generate motion. Each resonator is equipped with strategically positioned passive legs that convert vibratory energy into effective thrust, enabling both linear and rotational movement. A differential drive configuration, implemented through two independently actuated resonators, allows precise guidance and the execution of complex trajectories. The robot integrates onboard control electronics consisting of a microcontroller and inertial sensors, which enable closed-loop trajectory correction via a PD controller and allow autonomous navigation. The experimental results demonstrate high-precision motion control, achieving linear displacement speeds of 8.87 mm/s and a maximum angular velocity of 37.88°/s, while maintaining low power consumption and a compact form factor. Furthermore, the evaluation using the mean absolute error (MAE) yielded a value of 0.83° in trajectory tracking. This work advances the field of robotics and automatic control at the insect scale by integrating efficient piezoelectric actuation, additive manufacturing, and embedded sensing into a single autonomous platform capable of agile and programmable locomotion.
Förderung
- Universidad de Castilla-La Mancha, Spain
- Universidad Politécnica Salesiana, Quito-Ecuador
Zitieren
APA
Chancusig, B. R. Z., Velastegui, J. R. H., Ruiz-Díez, V., & Sánchez-Rojas, J. L. (2026). Autonomous Locomotion and Embedded Trajectory Control in Miniature Robots Using Piezoelectric-Actuated 3D-Printed Resonators. Actuators, 15(1), 23. https://doi.org/10.3390/act15010023
Vancouver
Chancusig BRZ, Velastegui JRH, Ruiz-Díez V, Sánchez-Rojas JL. Autonomous Locomotion and Embedded Trajectory Control in Miniature Robots Using Piezoelectric-Actuated 3D-Printed Resonators. Actuators. 2026;15(1):23. doi:10.3390/act15010023
BibTeX
@article{Chancusig2026,
author = {Chancusig, Byron Ricardo Zapata and Velastegui, Jaime Rolando Heredia and Ruiz-Díez, Víctor and Sánchez-Rojas, José Luis},
title = {Autonomous Locomotion and Embedded Trajectory Control in Miniature Robots Using Piezoelectric-Actuated 3D-Printed Resonators},
journal = {Actuators},
year = {2026},
volume = {15},
number = {1},
pages = {23},
doi = {10.3390/act15010023}
}
EUVIMED