EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Inertial Force Suppression Control for Hydraulic Cylinder Synchronization of Shield Tunnel Segment Erector Based on Sliding Mode Control

Fangao Zhang, Zhaoqiang Wang, Xiaori Zhang, Xiaoqiang Wang, Xiaoxi Hu

Actuators · 11.09.2025 · 14 (9) · 449

DOI: 10.3390/act14090449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 11.09.2025. Verfasst von Fangao Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As a critical component in tunnel construction, the segment erector of shield tunneling machines critically influences segment assembly quality and construction efficiency, largely determined by its dual-cylinder synchronization control. Addressing challenges such as dynamic coupling, nonlinear disturbances, and significant inertial force fluctuations inherent in hydraulic cylinder synchronization under large-inertia loads and variable working conditions, this study proposes an optimized inertial force suppression strategy utilizing an improved sliding mode control (SMC). Mechanical and hydraulic dynamic models of the dual-cylinder lifting mechanism were established to analyze load distribution and force-arm variation patterns, thereby elucidating the influence of inertial forces on synchronization accuracy. Based on this analysis, an adaptive boundary-layer SMC, incorporating real-time inertial force compensation, was designed. This design effectively suppresses system chattering and enhances robustness. Simulation and experimental results demonstrate that the proposed method achieves synchronization errors within ±0.5 mm during step responses, reduces inertial force peaks by 50%, and exhibits significantly superior anti-interference performance compared to conventional PID control. This research provides theoretical foundations and practical engineering insights for high-precision synchronization control in shield tunneling, demonstrating substantial application value.

Zitieren

APA

Zhang, F., Wang, Z., Zhang, X., Wang, X., & Hu, X. (2025). Research on Inertial Force Suppression Control for Hydraulic Cylinder Synchronization of Shield Tunnel Segment Erector Based on Sliding Mode Control. Actuators, 14(9), 449. https://doi.org/10.3390/act14090449

Vancouver

Zhang F, Wang Z, Zhang X, Wang X, Hu X. Research on Inertial Force Suppression Control for Hydraulic Cylinder Synchronization of Shield Tunnel Segment Erector Based on Sliding Mode Control. Actuators. 2025;14(9):449. doi:10.3390/act14090449

BibTeX
@article{Zhang2025,
  author = {Zhang, Fangao and Wang, Zhaoqiang and Zhang, Xiaori and Wang, Xiaoqiang and Hu, Xiaoxi},
  title = {Research on Inertial Force Suppression Control for Hydraulic Cylinder Synchronization of Shield Tunnel Segment Erector Based on Sliding Mode Control},
  journal = {Actuators},
  year = {2025},
  volume = {14},
  number = {9},
  pages = {449},
  doi = {10.3390/act14090449}
}
Kostenlos starten →