Numerical Investigation of the Tribological Performance of Surface-Textured Bushings in External Gear Pumps Under Transient Lubrication Conditions
Actuators · 11.07.2025 · 14 (7) · 345
DOI: 10.3390/act14070345 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 11.07.2025. Verfasst von Paolo Casoli und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study presents a computational fluid dynamics (CFDs) investigation of the hydrodynamic behavior of surface-textured lateral bushings in external gear pumps (EGPs), emphasizing the effects of combined sliding and squeezing motions within the lubrication gap. A comprehensive numerical model was developed to analyze how surface texturing implemented through different dimple shapes and texture densities influences pressure distribution and load-carrying capacity under transient lubrication conditions. The analysis demonstrates that the interaction between shear-driven flow and squeeze-film compression significantly amplifies pressure, particularly when optimal dimple configurations are applied. Results indicate that dimple geometry, depth, and arrangement critically influence hydrodynamic performance, while excessive texturing reduces effectiveness due to increased average gap height. Cavitation was intentionally not modeled in the early single dimple evaluations to allow clear comparison between configurations. The findings offer a design guideline for employing surface textures to enhance tribological performance and efficiency in EGP applications under realistic dynamic conditions.
Zitieren
APA
Casoli, P., Garousi, M. H., Rundo, M., & Vescovini, C. M. (2025). Numerical Investigation of the Tribological Performance of Surface-Textured Bushings in External Gear Pumps Under Transient Lubrication Conditions. Actuators, 14(7), 345. https://doi.org/10.3390/act14070345
Vancouver
Casoli P, Garousi MH, Rundo M, Vescovini CM. Numerical Investigation of the Tribological Performance of Surface-Textured Bushings in External Gear Pumps Under Transient Lubrication Conditions. Actuators. 2025;14(7):345. doi:10.3390/act14070345
BibTeX
@article{Casoli2025,
author = {Casoli, Paolo and Garousi, Masoud Hatami and Rundo, Massimo and Vescovini, Carlo Maria},
title = {Numerical Investigation of the Tribological Performance of Surface-Textured Bushings in External Gear Pumps Under Transient Lubrication Conditions},
journal = {Actuators},
year = {2025},
volume = {14},
number = {7},
pages = {345},
doi = {10.3390/act14070345}
}
EUVIMED