Robotic Tack Welding Path and Trajectory Optimization Using an LF-IWOA
Actuators · 10.06.2025 · 14 (6) · 287
DOI: 10.3390/act14060287 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 10.06.2025. Verfasst von Bingqi Jia und 5 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Science and Technology Major Program, Guangxi graduate education.
Abstract (Originalsprache)
Robotic tack welding poses challenges in path optimization due to local optimum entrapment, limited adaptability, and high-dimensional complexity. To overcome these challenges, a Lévy flight-enhanced improved whale optimization algorithm (LF-IWOA) was developed. The algorithm combines elite opposition-based learning (EOBL), differential evolution (DE), and Lévy flight (LF) to improve global exploration capability, increase population diversity, and improve convergence. Additionally, a dynamic trajectory optimization model is designed to consider joint-level constraints, including velocity, acceleration, and jerk. The performance of LF-IWOA was evaluated using two industrial workpieces with varying welding point distributions. Comparative experiments with metaheuristic algorithms, such as the genetic algorithm (GA), WOA and other recent nature-inspired methods, show that LF-IWOA consistently achieves shorter paths and faster convergence. For Workpiece 1, the algorithm reduces the welding path by up to 25.53% compared to the genetic algorithm, with an average reduction of 14.82% across benchmarks. For Workpiece 2, the optimized path is 18.41% shorter than the baseline. Moreover, the dynamic trajectory optimization strategy decreases execution time by 26.83% and reduces mechanical energy consumption by 15.40% while maintaining smooth and stable joint motion. Experimental results demonstrated the effectiveness and practical applicability of the LF-IWOA in robotic welding tasks.
Förderung
- Guangxi Science and Technology Major Program
- Guangxi graduate education
Zitieren
APA
Jia, B., Pan, H., Zhang, L., Yang, Y., Chen, H., & Chen, L. (2025). Robotic Tack Welding Path and Trajectory Optimization Using an LF-IWOA. Actuators, 14(6), 287. https://doi.org/10.3390/act14060287
Vancouver
Jia B, Pan H, Zhang L, Yang Y, Chen H, Chen L. Robotic Tack Welding Path and Trajectory Optimization Using an LF-IWOA. Actuators. 2025;14(6):287. doi:10.3390/act14060287
BibTeX
@article{Jia2025,
author = {Jia, Bingqi and Pan, Haihong and Zhang, Lei and Yang, Yifan and Chen, Huaxin and Chen, Lin},
title = {Robotic Tack Welding Path and Trajectory Optimization Using an LF-IWOA},
journal = {Actuators},
year = {2025},
volume = {14},
number = {6},
pages = {287},
doi = {10.3390/act14060287}
}
EUVIMED