A Multi-Branch Convolution and Dynamic Weighting Method for Bearing Fault Diagnosis Based on Acoustic–Vibration Information Fusion
Actuators · 07.01.2025 · 14 (1) · 17
DOI: 10.3390/act14010017 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 07.01.2025. Verfasst von Xianming Sun und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Liaoning Provincial Natural Science Foundation, Joint Open Fund for Key Science and Technology Innovation Bases, 2021 Ningbo River Attracting Talents Project for Innovative Talents in Science and Technology Services in Urban Economic Field.
Abstract (Originalsprache)
Rolling bearings, as critical components of rotating machinery, directly affect the reliability and efficiency of the system. Due to extended operation under high load, harsh environmental conditions, and continuous use, bearings become more susceptible to failure, leading to a higher likelihood of malfunction. To prevent sudden failures, reduce downtime, and optimize maintenance strategies, early and accurate diagnosis of rolling bearing faults is essential. Although existing methods have achieved certain success in processing acoustic and vibration signals, they still face challenges such as insufficient feature fusion, inflexible weight allocation, lack of effective feature selection mechanisms, and low computational efficiency. To address these challenges, we propose a dynamic weighted multimodal fault diagnosis model based on the fusion of acoustic and vibration information. This model aims to enhance feature fusion, dynamically adapt to signal characteristics, optimize feature selection, and reduce computational complexity. The model incorporates an adaptive fusion method based on a multi-branch convolutional structure, enabling unified processing of both acoustic and vibration signals. At the same time, a cross-modal dynamic weighted fusion mechanism is employed, allowing the real-time adjustment of weight distribution based on signal characteristics. By utilizing an attention mechanism for dynamic feature selection and weighting, the robustness of classification is further improved. Additionally, when processing acoustic signals, a depthwise separable convolutional network is used, effectively reducing computational complexity. Experimental results demonstrate that our method significantly outperforms other algorithms in terms of convergence speed and final performance. Additionally, the accuracy curve during training showed minimal fluctuation, reflecting higher robustness. The model achieved over 99% diagnostic accuracy under all signal-to-noise ratio (SNR) conditions, showcasing exceptional robustness and noise resistance in both noisy and high-SNR environments. Furthermore, its superiority across different data scales, especially in small-sample learning and stability, highlights its strong generalization capability.
Förderung
- Liaoning Provincial Natural Science Foundation, Joint Open Fund for Key Science and Technology Innovation Bases
- 2021 Ningbo River Attracting Talents Project for Innovative Talents in Science and Technology Services in Urban Economic Field
Zitieren
APA
Sun, X., Yang, Y., Chen, C., Tian, M., Du, S., & Wang, Z. (2025). A Multi-Branch Convolution and Dynamic Weighting Method for Bearing Fault Diagnosis Based on Acoustic–Vibration Information Fusion. Actuators, 14(1), 17. https://doi.org/10.3390/act14010017
Vancouver
Sun X, Yang Y, Chen C, Tian M, Du S, Wang Z. A Multi-Branch Convolution and Dynamic Weighting Method for Bearing Fault Diagnosis Based on Acoustic–Vibration Information Fusion. Actuators. 2025;14(1):17. doi:10.3390/act14010017
BibTeX
@article{Sun2025,
author = {Sun, Xianming and Yang, Yuhang and Chen, Changzheng and Tian, Miao and Du, Shengnan and Wang, Zhengqi},
title = {A Multi-Branch Convolution and Dynamic Weighting Method for Bearing Fault Diagnosis Based on Acoustic–Vibration Information Fusion},
journal = {Actuators},
year = {2025},
volume = {14},
number = {1},
pages = {17},
doi = {10.3390/act14010017}
}
EUVIMED