EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Acoustic Emission Parameter Analysis of Damage in Reinforced Concrete Beams Under the Coupling Effect of Freeze–Thaw and Corrosion

Xianqiang Wang, Xiaonan Feng, Fan Yi, Wenxin Cai

Acoustics · 03.08.2026 · 8 (3) · 55

DOI: 10.3390/acoustics8030055 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Acoustics, online erschienen am 03.08.2026. Verfasst von Xianqiang Wang und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Basic Research Program from the Natural Science Foundation of Jiangsu Province, China, Jiangsu Province Youth Science and Technology Talent Support Project, Key Science and Technology Project of Transportation Industry, China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the evolution of acoustic emission (AE) parameters during the flexural failure of reinforced concrete (RC) beams subjected to freeze–thaw and corrosion, four RC beams were fabricated and assigned to four conditioning regimes: no deterioration, freeze–thaw only (75 cycles), corrosion only (4.8% mass loss), and combined. Three-point bending tests were conducted, combining AE and digital image correlation (DIC) techniques. The damage process was divided into four stages: micro-crack initiation, stable crack propagation, unstable crack propagation, and failure. The evolution of AE parameters including ring count, energy, amplitude, peak count, and duration was analyzed. Each parameter is positively correlated with load level and rises as the damage stage advances. The slope of cumulative parameters reflects crack development more reliably than instantaneous values. The effect of corrosion on these parameters is significantly greater than that of freeze–thaw. For corroded beams, AE parameter levels are higher during the micro-crack initiation stage but lower during the stable crack propagation stage. The overall AE activity decreases with increasing deterioration degree. High-amplitude events increase with damage progression, but fewer high-amplitude events are observed at the failure stage of severely deteriorated beams. This study reveals the correspondence between AE parameters and damage stages, providing an experimental basis for damage assessment using AE techniques.

Förderung

  • Basic Research Program from the Natural Science Foundation of Jiangsu Province, China
  • Jiangsu Province Youth Science and Technology Talent Support Project
  • Key Science and Technology Project of Transportation Industry, China

Zitieren

APA

Wang, X., Feng, X., Yi, F., & Cai, W. (2026). An Acoustic Emission Parameter Analysis of Damage in Reinforced Concrete Beams Under the Coupling Effect of Freeze–Thaw and Corrosion. Acoustics, 8(3), 55. https://doi.org/10.3390/acoustics8030055

Vancouver

Wang X, Feng X, Yi F, Cai W. An Acoustic Emission Parameter Analysis of Damage in Reinforced Concrete Beams Under the Coupling Effect of Freeze–Thaw and Corrosion. Acoustics. 2026;8(3):55. doi:10.3390/acoustics8030055

BibTeX
@article{Wang2026,
  author = {Wang, Xianqiang and Feng, Xiaonan and Yi, Fan and Cai, Wenxin},
  title = {An Acoustic Emission Parameter Analysis of Damage in Reinforced Concrete Beams Under the Coupling Effect of Freeze–Thaw and Corrosion},
  journal = {Acoustics},
  year = {2026},
  volume = {8},
  number = {3},
  pages = {55},
  doi = {10.3390/acoustics8030055}
}
Kostenlos starten →