EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Accuracy of novel custom 3D-printed metal and polymer cutting guides for segmental mandibulectomy in the dog: a cadaveric study

Rachel McKay, Marine Traverson, Caroline Alting, Satyanarayana Konala, Erin Perry, Angelica Luzzi, Ken Gall

Frontiers in Veterinary Science · 04.03.2026 · 13

DOI: 10.3389/fvets.2026.1780938 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Veterinary Science, online erschienen am 04.03.2026. Verfasst von Rachel McKay und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Clinical Sciences, College of Veterinary Medicine, North Carolina State University, Raleigh, NC, United States. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

The objectives of this study were to design a 3D-printed custom guide for segmental mandibulectomy in the dog and evaluate the impact of different materials (metal versus polymer) on the performances of the guided procedure in cadaveric dogs.

Methods

Twenty canine cadaveric heads were randomized in two study groups and received bilateral segmental mandibulectomies performed with a metal or polymer surgical guide. Pre-operative computed tomography (CT) images of the skull were used to design custom 3D-printed surgical guides and were repeated after placement and osteotomy. Mean absolute linear deviation between planned and performed cuts, procedure duration, and qualitative assessment were compared.

Results

Polymer guides were associated with easier ( p =0.020) and faster ( p =0.004) placement. No incidence of failure was recorded when using metal guides, whereas 30 and 15% of polymer guides experienced cracking and fissuring, respectively ( p =0.001). Dorsal displacement and gap formation between guide and mandibular body was noted in 7/20 metal guides on CT. Mean absolute linear deviation between planned and performed cuts was not significantly different between material groups ( p =0.612). Polymer guides presented several advantages including efficient placement despite a high incidence of material failure. Difficulty of placement encountered with metal guides relates to the rigidity of the material. However, these limitations did not have any significant impact on surgical accuracy.

Discussion

Overall, the study did not demonstrate any difference in accuracy between materials but highlighted differences in performance specific to each material. Thus, surgical guide manufacturing and material choice could be tailored to specific clinical applications, whether strength/durability or flexibility/conformability is favored.

Schlagwörter

Stichwörter der Autor:innen

3D-printingaccuracymandibulectomymaterialssurgical guide

Autor:innen und Institutionen

  • Department of Clinical Sciences, College of Veterinary Medicine, North Carolina State University, Raleigh, NC, United States.
  • Department of Mechanical Engineering and Materials Science, Duke University, Durham, NC, United States.
  • Center for Additive Manufacturing and Logistics, Fitts Department of Industrial and Systems Engineering, North Carolina State University, Raleigh, NC, United States.
  • Restor3d, Durham, NC, United States.

Zitieren

APA

McKay, R., Traverson, M., Alting, C., Konala, S., Perry, E., Luzzi, A., & Gall, K. (2026). Accuracy of novel custom 3D-printed metal and polymer cutting guides for segmental mandibulectomy in the dog: a cadaveric study. Frontiers in Veterinary Science, 13. https://doi.org/10.3389/fvets.2026.1780938

Vancouver

McKay R, Traverson M, Alting C, Konala S, Perry E, Luzzi A, et al. Accuracy of novel custom 3D-printed metal and polymer cutting guides for segmental mandibulectomy in the dog: a cadaveric study. Frontiers in Veterinary Science. 2026;13. doi:10.3389/fvets.2026.1780938

BibTeX
@article{McKay2026,
  author = {McKay, Rachel and Traverson, Marine and Alting, Caroline and Konala, Satyanarayana and Perry, Erin and Luzzi, Angelica and Gall, Ken},
  title = {Accuracy of novel custom 3D-printed metal and polymer cutting guides for segmental mandibulectomy in the dog: a cadaveric study},
  journal = {Frontiers in Veterinary Science},
  year = {2026},
  volume = {13},
  doi = {10.3389/fvets.2026.1780938}
}
Kostenlos starten →