EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Carbon nanostructures supported on Co/serpentinite for sulfentrazone removal

Emilay Baessa Teixeira Diogo, Angelica Fonseca Pinto Vieira, Mayra Aparecida Nascimento, Paula Sevenini Pinto, Fabiano Gomes Ferreira de Paula, Renata Pereira Lopes Moreira, Ana Paula de Carvalho Teixeira

Frontiers in Carbon · 2024

DOI: 10.3389/frcrb.2024.1402105 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Carbon, 2024. Verfasst von Emilay Baessa Teixeira Diogo und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Coordenação de Aperfeiçoamento de Pessoal de Nível Superior, Fundação de Amparo à Pesquisa do Estado de Minas Gerais.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The presence of environmental contaminants is a major problem today. In this context, it is necessary to develop new sustainable materials to be used to remediate these contaminants. In this work, the serpentinite rock was impregnated with cobalt, 5%, 10% and 20% and used as a support for the synthesis of carbon nanostructures by CVD (chemical vapour deposition) process, at 900°C. This temperature was chosen due to the high thermal stability of the carbon source. The materials were characterized by X-ray diffraction, Raman spectroscopy, thermal analysis, scanning and transmission microscopy. As expect the main phases formed were forsterite, Mg 2 SiO 4 , graphitic carbon and metallic cobalt. All the synthesis showed the formation of carbon structures as multiwalled carbon nanostructures over cobalt cores. The carbon structures showed good thermal stability, between 470 and 600°C. The higher the cobalt content, the higher the yield of the carbon structures synthesis, i.e. 14%, 23% and 37% for Serp5, Serp10 and Serp20, respectively. The produced materials were used to removal of the environmental contaminant sulfentrazone. After CVD process, the removal of sulfentrazone increase to 17.3%, 18.4% and 25.2% for Serp5, Serp10 and Serp20, respectively, showing an increase in sulfentrazone removal with the increase in carbon content. In addition, the percentage of sulfentrazone removal by Serp20 was greater at acidic pH values, decreasing from 41.7% to 12.7% with an increase from 2 to 10 in pH. The removal capacity obtained experimentally at a sulfentrazone concentration of 50 mg L −1 was equal to 14.9 mg g −1 . According to literature and data obtained in this work, it was observed that the removal of contaminants from the aqueous medium occurred through two mechanisms: reduction of the organic compound by Co nanoparticles and adsorption carried out by carbon nanostructures.

Förderung

  • Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
  • Fundação de Amparo à Pesquisa do Estado de Minas Gerais

Zitieren

APA

Diogo, E. B. T., Vieira, A. F. P., Nascimento, M. A., Pinto, P. S., Paula, F. G. F. D., Moreira, R. P. L., & Teixeira, A. P. D. C. (2024). Carbon nanostructures supported on Co/serpentinite for sulfentrazone removal. Frontiers in Carbon. https://doi.org/10.3389/frcrb.2024.1402105

Vancouver

Diogo EBT, Vieira AFP, Nascimento MA, Pinto PS, Paula FGFD, Moreira RPL, et al. Carbon nanostructures supported on Co/serpentinite for sulfentrazone removal. Frontiers in Carbon. 2024. doi:10.3389/frcrb.2024.1402105

BibTeX
@article{Diogo2024,
  author = {Diogo, Emilay Baessa Teixeira and Vieira, Angelica Fonseca Pinto and Nascimento, Mayra Aparecida and Pinto, Paula Sevenini and Paula, Fabiano Gomes Ferreira de and Moreira, Renata Pereira Lopes and Teixeira, Ana Paula de Carvalho},
  title = {Carbon nanostructures supported on Co/serpentinite for sulfentrazone removal},
  journal = {Frontiers in Carbon},
  year = {2024},
  doi = {10.3389/frcrb.2024.1402105}
}
Kostenlos starten →