EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ultrahigh molecular weight polyethylene-reduced graphene oxide composite scaling up to produce wear resistant plates

Leice Gonçalves Amurin, Poliane Neves De Oliveira, Ana Flávia Tavares S. Pereira, Nirvana Cecília Ribeiro, Daniel Bastos De Rezende, Glaura Goulart Silva

Frontiers in Carbon · 2023

DOI: 10.3389/frcrb.2023.1291283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Carbon, 2023. Verfasst von Leice Gonçalves Amurin und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Maintaining the properties of nanocomposites obtained at the laboratory scale when evolving to pilot and industrial scales is a great challenge. In this work, the route for a 3000-fold increase in scale between the laboratory and production in an industrial environment was conducted in two stages–Pilot 1 and Pilot 2–to obtain polymeric nanocomposite plates for pilot testing. The nanocomposite was based on ultrahigh molecular weight polyethylene (UHMWPE) and reduced graphene oxide (rGO), and several different operations were optimized for complete scale-up, i.e., 1) production of reduced graphite oxide (rGrO); 2) exfoliation of rGrO; 3) milling of rGO with UHMWPE in a ball mill to produce masterbatch; and 4) RAM extrusion to produce the plates. All these steps were accompanied by characterizations that show the quality of the nanomaterial, masterbatch and nanocomposite plates. The gains in nanocomposite properties with 0.25 wt% rGO with respect to UHMWPE were ∼45% in elastic modulus, ∼50% in hardness, ∼25% in impact strength and 15% in abrasion wear (two-body test). The nanocomposite surfaces after wear tests are more hydrophobic than UHWWPE. The Pilot 1 results were generally superior to the Pilot 2 results, probably due to the very different thicknesses of the plates, i.e., 10 mm in Pilot 1 and 40 mm in Pilot 2. The improvement in different properties confirms the multifunctionality of the nanocomposite UHMWPE/rGO now produced on a pilot scale.

Zitieren

APA

Amurin, L. G., Oliveira, P. N. D., Pereira, A. F. T. S., Ribeiro, N. C., Rezende, D. B. D., & Silva, G. G. (2023). Ultrahigh molecular weight polyethylene-reduced graphene oxide composite scaling up to produce wear resistant plates. Frontiers in Carbon. https://doi.org/10.3389/frcrb.2023.1291283

Vancouver

Amurin LG, Oliveira PND, Pereira AFTS, Ribeiro NC, Rezende DBD, Silva GG. Ultrahigh molecular weight polyethylene-reduced graphene oxide composite scaling up to produce wear resistant plates. Frontiers in Carbon. 2023. doi:10.3389/frcrb.2023.1291283

BibTeX
@article{Amurin2023,
  author = {Amurin, Leice Gonçalves and Oliveira, Poliane Neves De and Pereira, Ana Flávia Tavares S. and Ribeiro, Nirvana Cecília and Rezende, Daniel Bastos De and Silva, Glaura Goulart},
  title = {Ultrahigh molecular weight polyethylene-reduced graphene oxide composite scaling up to produce wear resistant plates},
  journal = {Frontiers in Carbon},
  year = {2023},
  doi = {10.3389/frcrb.2023.1291283}
}
Kostenlos starten →