Galling: a-state-of-the-art review
Frontiers in Coatings, Dyes and Interface Engineering · 17.11.2026 · 4
DOI: 10.3389/frcdi.2026.1968451 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Coatings, Dyes and Interface Engineering, online erschienen am 17.11.2026. Verfasst von Arda Küpelioğlu und 2 weiteren Autor:innen. Die Arbeit nennt 122 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Rolls-Royce, Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
Galling is a severe form of adhesive wear that affects a wide range of engineering systems, particularly stainless steel components operating under high contact loads and inadequate lubrication. Despite decades of research, the mechanisms governing galling initiation and progression remain poorly understood, limiting the development of reliable predictive models and mitigation strategies. This review critically examines the current understanding of galling by synthesising evidence from experimental studies, surface and microstructural characterisation, tribological testing, numerical modelling, and emerging data-centric approaches. The literature shows that galling is not controlled by a single material property or operating parameter, but arises from complex interactions among contact mechanics, plastic deformation, oxide-film evolution, surface topography, microstructure, tribochemistry, and material transfer across multiple spatial and temporal scales. Existing analytical and numerical models provide valuable mechanistic insights but remain limited by simplifying assumptions and their inability to fully capture the evolving nature of tribological interfaces. Similarly, standardised test methods rely largely on post-mortem assessment, hindering the identification of galling initiation and precursor events. Advances in multimodal sensing, machine learning, and triboinformatics offer new opportunities to improve understanding and prediction of galling through the integration of complementary datasets and physics-informed modelling. The review highlights key knowledge gaps, including the lack of in situ observations, predictive instability criteria, and comprehensive multi-physics models, and outlines future directions towards data-centric and mechanistically informed approaches for galling prediction, material selection, and tribological system design.
Förderung
- Rolls-Royce
- Engineering and Physical Sciences Research Council
Zitieren
APA
Küpelioğlu, A., Wood, R., & Stewart, D. (2026). Galling: a-state-of-the-art review. Frontiers in Coatings, Dyes and Interface Engineering, 4. https://doi.org/10.3389/frcdi.2026.1968451
Vancouver
Küpelioğlu A, Wood R, Stewart D. Galling: a-state-of-the-art review. Frontiers in Coatings, Dyes and Interface Engineering. 2026;4. doi:10.3389/frcdi.2026.1968451
BibTeX
@article{Kpeliolu2026,
author = {Küpelioğlu, Arda and Wood, Robert and Stewart, David},
title = {Galling: a-state-of-the-art review},
journal = {Frontiers in Coatings, Dyes and Interface Engineering},
year = {2026},
volume = {4},
doi = {10.3389/frcdi.2026.1968451}
}
EUVIMED