Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations
Frontiers in Aerospace Engineering · 26.04.2023 · 2
DOI: 10.3389/fpace.2023.1123249 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Aerospace Engineering, online erschienen am 26.04.2023. Verfasst von Takuma Sato und 2 weiteren Autor:innen. Die Arbeit wurde bisher 31-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High-fidelity numerical simulations of an experimental rotating detonation engine with discrete fuel/air injection were conducted. A series of configurations with different feed-plenum pressures but with constant equivalence ratio were studied. Detailed chemical kinetics for the hydrogen/air system is used. A resolution study for the full rotating detonation engine (RDE) system simulation is also conducted. Two kinds of boundary conditions, a total pressure boundary and a constant mass flow rate boundary, are used to assess the effects of the inlet boundary. As mass flow rate is increased, the total pressure boundary causes more error in the axial pressure distribution while the constant mass flow rate gives a better solution for all cases ran. The simulations confirm experimental findings, and reproduce qualitative as well as some of the quantitative trends. These results demonstrate that a) fuel-air mixing is highly non-uniform within the detonation chamber, leading to variations in local equivalence ratio, b) the fuel and oxidizer injectors experience significant backflow as the detonation wave passes over, but recover at different rates which further augments the inefficiencies in mixing, and c) parasitic combustion in the mixing region makes the detonation wave weak by extending the reaction zone across the wave.
Zitieren
APA
Sato, T., Beck, C. V., & Raman, V. (2023). Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations. Frontiers in Aerospace Engineering, 2. https://doi.org/10.3389/fpace.2023.1123249
Vancouver
Sato T, Beck CV, Raman V. Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations. Frontiers in Aerospace Engineering. 2023;2. doi:10.3389/fpace.2023.1123249
BibTeX
@article{Sato2023,
author = {Sato, Takuma and Beck, Caleb Van and Raman, Venkat},
title = {Numerical and boundary condition effects on the prediction of detonation engine behavior using detailed numerical simulations},
journal = {Frontiers in Aerospace Engineering},
year = {2023},
volume = {2},
doi = {10.3389/fpace.2023.1123249}
}
EUVIMED