A 3D-printed phantom to validate subject orientation in 3D imaging and recordings
Frontiers in Neuroinformatics · 28.05.2026 · 20
DOI: 10.3389/fninf.2026.1613151 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Neuroinformatics, online erschienen am 28.05.2026. Verfasst von Guillaume Jean-Paul Claude Becq und 7 weiteren Autor:innen. Beteiligte Einrichtung: Univ. Grenoble Alpes, CNRS, Grenoble INP, Gipsa-lab, UMR 5216, Grenoble, France. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
A phantom defined by a 3D-printed system of markers representing an anatomical coordinate system is proposed. This phantom is designed for use in magnetic resonance and X-ray imaging devices to validate acquisition parameters and prevent laterality errors during image acquisition and processing. The phantom allows visualization of the coordinate system axes – left-right, posterior-anterior, and inferior-superior – in all orthogonal slices of a volume. A computational method, using the phantom as a reference, is also proposed to automatically detect and correct flips and permutations in RAS coordinate system representations. Testing the phantom across four modalities available in our platforms, followed by conversions of the recordings to the NIfTI format, enables the detection, correction, and adjustment of protocols in 4 out of 5 configurations. The 3D printing models and orientation detection/correction code are shared with the community as open-source and open-access resources to enable quick, cost-effective, and accessible production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Univ. Grenoble Alpes, CNRS, Grenoble INP, Gipsa-lab, UMR 5216, Grenoble, France.
- Univ. Grenoble Alpes, Inserm, CHU Grenoble Alpes, CNRS, IRMaGe, Grenoble, France.
- Univ. Grenoble Alpes, Inserm, UA07 Synchrotron Radiation for Biomedicine, Grenoble, France.
- Univ. Grenoble Alpes, Inserm, U1216, Grenoble Institut Neurosciences, Grenoble, France.
Zitieren
APA
Becq, G. J. C., Montigon, O., Keshmiri, S., Delphin, A., Galloux, P., Mathieu, H., Lemasson, B., & Barbier, E. L. (2026). A 3D-printed phantom to validate subject orientation in 3D imaging and recordings. Frontiers in Neuroinformatics, 20. https://doi.org/10.3389/fninf.2026.1613151
Vancouver
Becq GJC, Montigon O, Keshmiri S, Delphin A, Galloux P, Mathieu H, et al. A 3D-printed phantom to validate subject orientation in 3D imaging and recordings. Frontiers in Neuroinformatics. 2026;20. doi:10.3389/fninf.2026.1613151
BibTeX
@article{Becq2026,
author = {Becq, Guillaume Jean-Paul Claude and Montigon, Olivier and Keshmiri, Sarvenaz and Delphin, Aurélien and Galloux, Paul and Mathieu, Hervé and Lemasson, Benjamin and Barbier, Emmanuel L},
title = {A 3D-printed phantom to validate subject orientation in 3D imaging and recordings},
journal = {Frontiers in Neuroinformatics},
year = {2026},
volume = {20},
doi = {10.3389/fninf.2026.1613151}
}
EUVIMED