Mode switching control strategy for dual-drive transmission system of pure electric vehicles
Frontiers in Mechanical Engineering · 04.08.2026 · 12
DOI: 10.3389/fmech.2026.1892426 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Mechanical Engineering, online erschienen am 04.08.2026. Verfasst von Kai Wang. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Introduction
Current studies mostly realize local single-condition optimization without full-process bidirectional coordinated control, failing to balance smoothness, durability and response speed simultaneously.
Methods
Complete bidirectional switching workflows for single-motor independent drive, torque coupling and speed coupling modes are designed with calibrated torque, speed and pressure thresholds; a multi-objective function containing impact intensity, sliding friction work and switching time is built with hierarchical hard/soft constraints, and MPC rolling optimization is adopted to solve the constrained problem; comparative simulations, anti-disturbance robustness tests and real-time performance evaluation are implemented on MATLAB/Simulink.
Results
The peak impact intensity under all conditions is controlled within 8.0 m/s 3 much lower than the industry limit. Compared with traditional SQP single-objective optimization, the average impact reduces by 38.8%, total sliding friction work cuts by 19.1%, switching response speeds up by 17.0%, and the mode switching success rate reaches 99.6%. Under ±30% parameter perturbations, the maximum impact change rate is merely 7.4%, and the algorithm single-step delay is 0.6 ms with only 28.6% hardware resource occupation, fully meeting vehicle real-time control demands.
Discussion
The presented strategy significantly suppresses switching shock and enhances system robustness, providing theoretical and technical support for dual-drive transmission control. Only simulation verification is completed at present; subsequent hardware-in-the-loop, powertrain bench and real vehicle road tests will be conducted to further verify its practical engineering performance.
Zitieren
APA
Wang, K. (2026). Mode switching control strategy for dual-drive transmission system of pure electric vehicles. Frontiers in Mechanical Engineering, 12. https://doi.org/10.3389/fmech.2026.1892426
Vancouver
Wang K. Mode switching control strategy for dual-drive transmission system of pure electric vehicles. Frontiers in Mechanical Engineering. 2026;12. doi:10.3389/fmech.2026.1892426
BibTeX
@article{Wang2026,
author = {Wang, Kai},
title = {Mode switching control strategy for dual-drive transmission system of pure electric vehicles},
journal = {Frontiers in Mechanical Engineering},
year = {2026},
volume = {12},
doi = {10.3389/fmech.2026.1892426}
}
EUVIMED