Optimization and analysis of EDM drilling parameters on AA7050 using statistical techniques
Frontiers in Mechanical Engineering · 17.06.2026 · 12
DOI: 10.3389/fmech.2026.1834462 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Mechanical Engineering, online erschienen am 17.06.2026. Verfasst von Anil Chourasiya und 5 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Metal matrix composites are being used more and more in engineering mainly because they show superior mechanical properties and a strong strength-to-weight ratio. In this work, AA7050/TiO 2 /BN hybrid composites were made by ultrasonic-assisted stir casting, then microstructure was checked through Field Emission Scanning Electron Microscopy (FESEM) and Energy Dispersive X-ray Spectroscopy (EDX). For EDM drilling, the trials were arranged with a Taguchi L9 orthogonal array, aiming to see how current (I), pulse-on time (Ton), pulse-off time (Toff), and the hybrid composition affect Material Removal Rate (MRR) and Surface Roughness (SR). The outcomes showed that the composite with 1 wt% TiO 2 and 1 wt% BN had a more uniform reinforcement distribution. That same sample also delivered the top hardness value, reaching 79.15 HRB. After that, ANOVA together with regression analysis suggested that current turned out to be the most dominant parameter controlling both MRR and SR, while the regression models produced R 2 values of 96.15% and 85.98% respectively. Overall, these results suggest that statistical optimization methods can enhance EDM drilling results effectively, and they give a dependable base for choosing the best machining parameters for AA7050-based hybrid composites.
Zitieren
APA
Chourasiya, A., Charde, M. M., Baghel, M., Kumar, A., Swarna, B., & Čepová, L. (2026). Optimization and analysis of EDM drilling parameters on AA7050 using statistical techniques. Frontiers in Mechanical Engineering, 12. https://doi.org/10.3389/fmech.2026.1834462
Vancouver
Chourasiya A, Charde MM, Baghel M, Kumar A, Swarna B, Čepová L. Optimization and analysis of EDM drilling parameters on AA7050 using statistical techniques. Frontiers in Mechanical Engineering. 2026;12. doi:10.3389/fmech.2026.1834462
BibTeX
@article{Chourasiya2026,
author = {Chourasiya, Anil and Charde, Maya M. and Baghel, Madhusudan and Kumar, Ashish and Swarna, B. and Čepová, Lenka},
title = {Optimization and analysis of EDM drilling parameters on AA7050 using statistical techniques},
journal = {Frontiers in Mechanical Engineering},
year = {2026},
volume = {12},
doi = {10.3389/fmech.2026.1834462}
}
EUVIMED