EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the stress performance of steel-concrete structures in prefabricated buildings

Mo Chen, Jie Gao

Frontiers in Mechanical Engineering · 08.05.2026 · 12

DOI: 10.3389/fmech.2026.1824947 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Mechanical Engineering, online erschienen am 08.05.2026. Verfasst von Mo Chen und 1 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

With the widespread application of prefabricated buildings, steel-concrete structures have also received more research.

Methods

This paper mainly analyzed the performance of bolt-connected steel-concrete structures under stress. Components B1 and B2 with concrete slab widths of 600 mm and 450 mm respectively were designed, with all other parameters being the same. Then, loading tests were carried out on the two components to analyze their performance under stress.

Results

It was found that the B1 component showed better stress performance, with a limit load of 296 kN, which showed an increase of 16% compared to B2, and the surface strain of both components gradually increased from both ends to the loading point.

Discussion

The results demonstrate the good performance of bolt-connected steel-concrete structures, providing some references for their practical application.

Zitieren

APA

Chen, M., & Gao, J. (2026). Analysis of the stress performance of steel-concrete structures in prefabricated buildings. Frontiers in Mechanical Engineering, 12. https://doi.org/10.3389/fmech.2026.1824947

Vancouver

Chen M, Gao J. Analysis of the stress performance of steel-concrete structures in prefabricated buildings. Frontiers in Mechanical Engineering. 2026;12. doi:10.3389/fmech.2026.1824947

BibTeX
@article{Chen2026,
  author = {Chen, Mo and Gao, Jie},
  title = {Analysis of the stress performance of steel-concrete structures in prefabricated buildings},
  journal = {Frontiers in Mechanical Engineering},
  year = {2026},
  volume = {12},
  doi = {10.3389/fmech.2026.1824947}
}
Kostenlos starten →