EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing

Nepu Saha, Jordan Klinger, Md Tahmid Islam, Toufiq Reza

Frontiers in Fuels · 22.02.2023 · 1

DOI: 10.3389/ffuel.2023.1105637 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Fuels, online erschienen am 22.02.2023. Verfasst von Nepu Saha und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bioenergy Technologies Office.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Because of accelerated urbanization and the development of a global economy, a large quantity of municipal solid waste (MSW) has been collected and disposed of by the municipalities. Due to this drastic increase in the disposal of MSW, the need for its management is a must to preserve the environment. Currently, approximately 50% of the total MSW generated in the United States has been utilized through various recycling, combustion, and composting technologies, which means the remaining 50% is sent to landfill; this is often known as non-recyclable MSW (nMSW). As this nMSW is physically and chemically heterogenous and contains very high amounts of inorganic material, processing is required prior to using it as a biorefinery feedstock. Thus, this study focused on how mechanical preprocessing advanced the physical and chemical properties of nMSW. The physical and chemical properties were investigated in terms of particle size distribution, bulk density, ultimate and proximate analysis, and the higher heating value (HHV). The combustion properties were examined in terms of ignition temperature, peak heat release rate, and combustion efficiency. Results showed that the variability of physical and chemical properties of nMSW can be reduced by mechanical preprocessing. For example, the variability of the bulk density of the as-received nMSW was approximately 17.3% while it reduced to 5.8% when the sample size was reduced to 2 mm. Similarly, the variability of ash and HHV reduced from 49.2% to 11.0% and 13.4%–4.2%, respectively. Combustion thermograms showed that the size reduction positively improved the combustion properties. For example, 2 mm of spec sample started to ignite approximately 4 times earlier and took 6.5 folds less time to reach the peak heating rate compared to as-received nMSW. Overall, the mechanical preprocessing reduced the variability of physical and chemical properties in addition to the improvement of combustion behavior of the nMSW which is one step forward toward the biorefinery feedstock.

Förderung

  • Bioenergy Technologies Office

Zitieren

APA

Saha, N., Klinger, J., Islam, M. T., & Reza, T. (2023). Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing. Frontiers in Fuels, 1. https://doi.org/10.3389/ffuel.2023.1105637

Vancouver

Saha N, Klinger J, Islam MT, Reza T. Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing. Frontiers in Fuels. 2023;1. doi:10.3389/ffuel.2023.1105637

BibTeX
@article{Saha2023,
  author = {Saha, Nepu and Klinger, Jordan and Islam, Md Tahmid and Reza, Toufiq},
  title = {Advanced biorefinery feedstock from non-recyclable municipal solid waste by mechanical preprocessing},
  journal = {Frontiers in Fuels},
  year = {2023},
  volume = {1},
  doi = {10.3389/ffuel.2023.1105637}
}
Kostenlos starten →