EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dosimetric characterization of organic-inorganic hybrid perovskite scintillators for low-energy diagnostic X-ray detection

Phasit Petisiwaveth, Amy Dickinson, Lorenzo Margotti, Andrea Ciavatti, Beatrice Fraboni, Paul Sellin, Marco Petasecca

Frontiers in Detector Science and Technology · 10.07.2026 · 4

DOI: 10.3389/fdest.2026.1844929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Detector Science and Technology, online erschienen am 10.07.2026. Verfasst von Phasit Petisiwaveth und 6 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Perovskite materials have recently emerged as promising candidates for radiation detection due to their strong X-ray absorption, efficient charge transport, and tunable optical properties. However, their performance in scintillation-based dosimetry remains insufficiently explored. This study systematically evaluates the radiation attenuation, radioluminescence, and dosimetric characteristics of two-dimensional organic–inorganic perovskite scintillators, B A 2 P b B r 4 and P E A 2 P b B r 4 , in comparison with conventional plastic ( E J 212 ) and inorganic ( B G O , L Y S O ) scintillators under low-energy X-ray irradiation. The perovskite samples exhibited mass attenuation coefficients significantly higher than those of the plastic scintillator and comparable to dense inorganic crystals, reflecting their high- Z composition. Under X-ray excitation, both materials exhibited narrow radioluminescence emission bands centred near 420 n m . The measured light yields were approximately 9.8 × 1 0 3 and 4.8 × 1 0 3 , p h o t o n s M e V − 1 for B A 2 P b B r 4 and P E A 2 P b B r 4 , respectively, indicating efficient conversion of absorbed X-ray energy into visible emission. Dosimetric measurements showed excellent dose linearity ( R 2 > 0.999 ) , high sensitivity despite small thicknesses, and stable, repeatable responses with relative standard deviations below 1.3 % . The perovskites also maintained consistent dose-rate behaviour across 0.11– 1.12 m G y s − 1 . Energy-dependent measurements revealed enhanced responses at lower photon energies, consistent with photoelectric absorption. Notably, differences between B A 2 P b B r 4 and P E A 2 P b B r 4 highlight the ability to tailor energy response through modifications of the organic spacer or inorganic framework, enabling compositionally engineered scintillators optimized for specific dosimetric tasks. Overall, these results show that organic–inorganic perovskite scintillators bridge the performance gap between plastic and inorganic materials, offering high sensitivity, stability, and compositional tunability, positioning them as versatile candidates for next-generation diagnostic X-ray detection and real-time dosimetry.

Zitieren

APA

Petisiwaveth, P., Dickinson, A., Margotti, L., Ciavatti, A., Fraboni, B., Sellin, P., & Petasecca, M. (2026). Dosimetric characterization of organic-inorganic hybrid perovskite scintillators for low-energy diagnostic X-ray detection. Frontiers in Detector Science and Technology, 4. https://doi.org/10.3389/fdest.2026.1844929

Vancouver

Petisiwaveth P, Dickinson A, Margotti L, Ciavatti A, Fraboni B, Sellin P, et al. Dosimetric characterization of organic-inorganic hybrid perovskite scintillators for low-energy diagnostic X-ray detection. Frontiers in Detector Science and Technology. 2026;4. doi:10.3389/fdest.2026.1844929

BibTeX
@article{Petisiwaveth2026,
  author = {Petisiwaveth, Phasit and Dickinson, Amy and Margotti, Lorenzo and Ciavatti, Andrea and Fraboni, Beatrice and Sellin, Paul and Petasecca, Marco},
  title = {Dosimetric characterization of organic-inorganic hybrid perovskite scintillators for low-energy diagnostic X-ray detection},
  journal = {Frontiers in Detector Science and Technology},
  year = {2026},
  volume = {4},
  doi = {10.3389/fdest.2026.1844929}
}
Kostenlos starten →