Magnesium production by molten salt electrolysis with liquid tin cathode and multiple effect distillation
Frontiers in Chemistry · 03.07.2023 · 11
DOI: 10.3389/fchem.2023.1192202 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Chemistry, online erschienen am 03.07.2023. Verfasst von Armaghan Ehsani Telgerafchi und 7 weiteren Autor:innen. Beteiligte Einrichtung: Energy Metals Research Group, Department of Mechanical and Materials Engineering, Worcester Polytechnic Institute, Worcester, MA, United States. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, U.S. Department of Energy.
Abstract (Originalsprache)
Low-cost clean primary production of magnesium metal is important for its use in many applications, from light-weight structural components to energy technologies. This work describes new experiments and cost and emissions analysis for a magnesium metal production process. The process combines molten salt electrolysis of MgO using MgF₂-CaF₂ electrolyte and a reactive liquid tin cathode, with gravity-driven multiple effect thermal system (G-METS) distillation to separate out the magnesium product, and re-use of the tin. Electrolysis experiments with carbon anodes showed current yield above 90%, while a yttria-stabilized zirconia solid oxide membrane (SOM) anode experiment showed 84% current yield. G-METS distillation is an important component of the envisioned process. It can potentially lower costs and energy use considerably compared with conventional magnesium distillation. Techno-economic analysis including detailed mass and energy balances shows that this electrolyte composition could lower costs by utilizing CaO, which is the primary impurity in MgO, as the Hall-Héroult process uses the sodium impurity in alumina. Analysis options include: raw material types (magnesite rock vs. brine or seawater), drying and calcining using electricity vs. natural gas, and carbon vs. SOM anode type. Using SOM inert anodes results in a cost premium around 10%–15%, mostly due to higher electrical energy usage resulting from membrane resistance, and reduces GHG emissions by approximately 1 kg CO₂/kg Mg product. Capital and operating cost estimates, and cradle to gate greenhouse gas (GHG) emissions analysis under several raw material and process technology scenarios, show comparable costs and emissions to those of aluminum production.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Energy Metals Research Group, Department of Mechanical and Materials Engineering, Worcester Polytechnic Institute, Worcester, MA, United States.
- Department of Chemistry, Cooperative Institute for Research in Environmental Sciences, University of Colorado Boulder, Boulder, CO, United States.
Förderung
- National Science Foundation
- U.S. Department of Energy
Zitieren
APA
Telgerafchi, A. E., Rutherford, M., Espinosa, G., McArthur, D., Masse, N., Perrin, B., Tang, Z., & Powell, A. C. (2023). Magnesium production by molten salt electrolysis with liquid tin cathode and multiple effect distillation. Frontiers in Chemistry, 11. https://doi.org/10.3389/fchem.2023.1192202
Vancouver
Telgerafchi AE, Rutherford M, Espinosa G, McArthur D, Masse N, Perrin B, et al. Magnesium production by molten salt electrolysis with liquid tin cathode and multiple effect distillation. Frontiers in Chemistry. 2023;11. doi:10.3389/fchem.2023.1192202
BibTeX
@article{Telgerafchi2023,
author = {Telgerafchi, Armaghan Ehsani and Rutherford, Madison and Espinosa, Gabriel and McArthur, Daniel and Masse, Nicholas and Perrin, Benjamin and Tang, Zujian and Powell, Adam C},
title = {Magnesium production by molten salt electrolysis with liquid tin cathode and multiple effect distillation},
journal = {Frontiers in Chemistry},
year = {2023},
volume = {11},
doi = {10.3389/fchem.2023.1192202}
}
EUVIMED