A review on gasification and pyrolysis of waste plastics
Frontiers in Chemistry · 03.02.2023 · 10
DOI: 10.3389/fchem.2022.960894 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Frontiers in Chemistry, online erschienen am 03.02.2023. Verfasst von Hamad Hussain Shah und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Engineering, University of Sannio, Benevento, Italy. Die Arbeit wurde bisher 264-mal zitiert (Crossref) und nennt 295 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Gasification and pyrolysis are thermal processes for converting carbonaceous substances into tar, ash, coke, char, and gas. Pyrolysis produces products such as char, tar, and gas, while gasification transforms carbon-containing products (e.g., the products from pyrolysis) into a primarily gaseous product. The composition of the products and their relative quantities are highly dependent on the configuration of the overall process and on the input fuel. Although in gasification, pyrolysis processes also occur in many cases (yet prior to the gasification processes), gasification is a common description for the overall technology. Pyrolysis, on the other hand, can be used without going through the gasification process. The current study evaluates the most common waste plastics valorization routes for producing gaseous and liquid products, as well as the key process specifications that affected the end final products. The reactor type, temperatures, residence time, pressure, the fluidizing gas type, the flow rate, and catalysts were all investigated in this study. Pyrolysis and waste gasification, on the other hand, are expected to become more common in the future. One explanation for this is that public opinion on the incineration of waste in some countries is a main impediment to the development of new incineration capacity. However, an exceptional capability of gasification and pyrolysis over incineration to conserve waste chemical energy is also essential.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Engineering, University of Sannio, Benevento, Italy.
- Department of Energy Systems Engineering, Seoul National University, Seoul, Republic of Korea.
- Department of Materials Technologies, Faculty of Materials Engineering, Silesian University of Technology, Gliwice, Poland.
- CEMMPRE - Centre for Mechanical Engineering Materials and Processes, Department of Mechanical Engineering, Rua Luís Reis Santos, Coimbra, Portugal.
- Laboratory for Tribology and Interface Nanotechnology, Faculty of Mechanical Engineering, University of Ljubljana, Ljubljana, Slovenia.
- Faculty of Electrical and Control Engineering, Gdańsk University of Technology, Gdańsk, Poland.
Zitieren
APA
Shah, H. H., Amin, M., Iqbal, A., Nadeem, I., Kalin, M., Soomar, A. M., & Galal, A. M. (2023). A review on gasification and pyrolysis of waste plastics. Frontiers in Chemistry, 10. https://doi.org/10.3389/fchem.2022.960894
Vancouver
Shah HH, Amin M, Iqbal A, Nadeem I, Kalin M, Soomar AM, et al. A review on gasification and pyrolysis of waste plastics. Frontiers in Chemistry. 2023;10. doi:10.3389/fchem.2022.960894
BibTeX
@article{Shah2023,
author = {Shah, Hamad Hussain and Amin, Muhammad and Iqbal, Amjad and Nadeem, Irfan and Kalin, Mitjan and Soomar, Arsalan Muhammad and Galal, Ahmed M},
title = {A review on gasification and pyrolysis of waste plastics},
journal = {Frontiers in Chemistry},
year = {2023},
volume = {10},
doi = {10.3389/fchem.2022.960894}
}
EUVIMED