Numerical evaluation of methanol synthesis in catalytic wall-coated microreactors: scale-up and performance analysis of planar and monolithic designs
Frontiers in Chemical Engineering · 02.08.2024 · 6
DOI: 10.3389/fceng.2024.1440657 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Chemical Engineering, online erschienen am 02.08.2024. Verfasst von João Lameu da Silva und 2 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 71 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação de Amparo à Pesquisa Do Estado de Minas Gerais.
Abstract (Originalsprache)
Methanol is one of the most important primary chemical compounds, being an interesting alternative for portable energy applications and also acting as a molecular platform for the synthesis of a wide range of commodities and high-added-value products. Traditionally, methanol is obtained by catalytic hydrogenation using synthesis gas (CO/CO 2 /H 2 ) in fixed-bed reactors (FBRs), which require large reaction volumes and are limited by heat and mass transfer. Wall-coated microreactor technology (MRT) offers a promising alternative to traditional fixed-bed reactors. Despite their potential, industrial-scale adoption of microreactors faces challenges related to scale-up. This article aimed to assess methanol synthesis in wall-coated microreactors (planar, or MRP, and monolithic, or MRM) through numerical performance evaluation, using a fixed-bed reactor as a reference. A pre-analysis of carbon conversion into methanol from experimental data provided insightful conclusions about recommended operating parameters, suggested as 50 bar, 250°C, a CO 2 ratio of 0.3–0.4, a gas hourly space velocity ( GHSV ) of 6,000–8,000 mL/g.h, and a stoichiometric hydrogen/carbon ratio of 2–4. The numerical model, coupling chemical kinetics into fluid dynamics, demonstrated good agreement with experimental data. Subsequently, a design of experiments identified optimal operating conditions for methanol synthesis (250°C, 50 bar, CO 2 ratio = 0.32, GHSV = 7,595 mL/g.h, hydrogen/carbon ratio = 2.4) in an FBR. The MRP and MRM presented equivalent performance with the FBR after adjusting the surface catalytic loading. In particular, the MRP showed a potential feature for scale-up due to the decreased pressure drop. A reactor block with 10 parallelized channels was designed and evaluated by changing GHSV between 5,000 and 50,000 mL/g.h and varying surface catalytic loading from 0.04 to 0.12 kg/m 2 . Despite the formation of recirculation zones in the conical region, the flow distribution remained satisfactory, ensuring virtually uniform methanol production among units, providing increased operational flow, and maintaining the microscale efficiency with a relatively low pressure drop. The present article provides a comprehensive analysis of the fundamental interplay between kinetic effects, mass transfer phenomena, and reactor design in methanol synthesis by applying MRT concepts, offering important insights for performance optimization and scale-up of wall-coated microreactors.
Förderung
- Fundação de Amparo à Pesquisa Do Estado de Minas Gerais
Zitieren
APA
Silva, J. L. D., Santana, H. S., & Hodapp, M. J. (2024). Numerical evaluation of methanol synthesis in catalytic wall-coated microreactors: scale-up and performance analysis of planar and monolithic designs. Frontiers in Chemical Engineering, 6. https://doi.org/10.3389/fceng.2024.1440657
Vancouver
Silva JLD, Santana HS, Hodapp MJ. Numerical evaluation of methanol synthesis in catalytic wall-coated microreactors: scale-up and performance analysis of planar and monolithic designs. Frontiers in Chemical Engineering. 2024;6. doi:10.3389/fceng.2024.1440657
BibTeX
@article{Silva2024,
author = {Silva, João Lameu da and Santana, Harrson Silva and Hodapp, Maximilian Joachim},
title = {Numerical evaluation of methanol synthesis in catalytic wall-coated microreactors: scale-up and performance analysis of planar and monolithic designs},
journal = {Frontiers in Chemical Engineering},
year = {2024},
volume = {6},
doi = {10.3389/fceng.2024.1440657}
}
EUVIMED