Prediction of the rutting factor of sulfur-modified bitumen using an Aquila-optimized gradient boosting model
Frontiers in Built Environment · 09.11.2026 · 12
DOI: 10.3389/fbuil.2026.1973128 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Built Environment, online erschienen am 09.11.2026. Verfasst von Thu Trang Nguyen und 3 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Predicting the rutting factor (RF) of sulfur-modified bitumen from published experiments requires accounting for nonlinear relationships among binder condition, modifier dosage, and aging-related variables while recognizing differences among material systems. This study develops an Aquila Optimization-tuned Gradient Boosting (GBoost-AO) regression model and compares it with XGBoost, Random Forest, support vector regression (SVR), and an Initial-RF identity baseline. The primary analytical dataset contains 221 experimental records from seven published studies. Using five fixed model-selection folds within 185 development records, GBoost-AO achieved a mean coefficient of determination (R 2 ) of 0.8899 and a pooled out-of-fold R 2 of 0.9040. GBoost-AO had the highest mean fold R 2 among the tested configurations, although Random Forest and the identity baseline had lower mean absolute errors. Performance decreased in a retrospective assessment of 36 records from another source study, yielding R 2 = 0.1825. An independent assessment using 23 digitized points from a published 40%-modifier curve yielded a nominal GBoost-AO R 2 of −8.2120 and substantial sensitivity to digitization uncertainty. Direct partial-dependence analysis identified Initial RF as having the largest modeled response range, followed by sulfur/modifier dosage and Aging Type; Sample Age did not affect predictions of the fitted model. Nested assessment across all seven sources also showed source dependence, and a two-record refit shifted the dosage-PDP maximum from 40% to 30%. Favorable development performance therefore coexisted with poor transfer and substantial errors relative to low RF measurements. The study provides a comparative framework for investigating these limitations rather than a validated replacement for binder testing or a general-purpose material-screening tool.
Zitieren
APA
Nguyen, T. T., Hoang, H. T., Bui, N. K., & Ly, H. (2026). Prediction of the rutting factor of sulfur-modified bitumen using an Aquila-optimized gradient boosting model. Frontiers in Built Environment, 12. https://doi.org/10.3389/fbuil.2026.1973128
Vancouver
Nguyen TT, Hoang HT, Bui NK, Ly H. Prediction of the rutting factor of sulfur-modified bitumen using an Aquila-optimized gradient boosting model. Frontiers in Built Environment. 2026;12. doi:10.3389/fbuil.2026.1973128
BibTeX
@article{Nguyen2026,
author = {Nguyen, Thu Trang and Hoang, Huong-Giang Thi and Bui, Ngoc Kien and Ly, Hai-Bang},
title = {Prediction of the rutting factor of sulfur-modified bitumen using an Aquila-optimized gradient boosting model},
journal = {Frontiers in Built Environment},
year = {2026},
volume = {12},
doi = {10.3389/fbuil.2026.1973128}
}
EUVIMED