EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-dimensional finite element analysis of full-arch implant-supported dental restorations: complete vs. segmented frameworks

Eduardo Anitua, Mikel Armentia, Luis Saracho

Frontiers in Bioengineering and Biotechnology · 30.04.2026 · 14

DOI: 10.3389/fbioe.2026.1759007 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 30.04.2026. Verfasst von Eduardo Anitua und 2 weiteren Autor:innen. Beteiligte Einrichtung: Eduardo Anitua Foundation, Vitoria, Spain. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

Given the reported clinical advantages of segmented implant-supported mandibular frameworks, multiple segmentation patterns were evaluated and compared with a complete (one-piece) framework to determine their effects on peri-implant bone stress.

Methods

Thirteen cases were studied via 3-D finite element analysis (FEA), combining complete and segmented full-arch frameworks across different implant layouts. Screws were preloaded according to manufacturer recommendations. Cortical and trabecular bone were modeled as homogeneous, isotropic, linearly elastic materials, and a fully osseointegrated implant–bone interface (shared-node mesh) was assumed. A static vertical load of 200 N was applied in three separate load cases: first molar, first premolar, and bilateral incisors. The primary outcome was peak von Mises equivalent stress in the peri-implant bone surrounding each implant as a comparative indicator of mechanical demand.

Results

When the load fell between two splinted implants (e.g., lateral segment without cantilever), peri-implant bone stresses were similar for complete and segmented frameworks. Under premolar loading, the complete framework yielded the lowest stresses; segmenting with a mesial cantilever on the lateral segment approximately doubled stresses at the adjacent implant, while placing a distal cantilever on the central segment increased stresses near the anterior support by up to ∼7× versus the complete configuration. Eliminating cantilevers by moving support from 5 to 4 closely approached the complete framework. Incisor loading challenged the central span: supports at 3–3 produced markedly higher stresses than complete frameworks; shifting supports to 2–2 reduced stresses but did not match the complete design, whereas triangulating the central span (3–2–3) further lowered stresses and approached complete-framework levels.

Conclusion

Segmented frameworks are biomechanically viable provided segmentation avoids central-span cantilevers, preferentially places any unavoidable cantilever on a straight lateral segment, and—when feasible—adds an anterior support to triangulate the central span or eliminates cantilevers by advancing support distally. With a properly planned segmented framework, peri-implant bone stresses can remain close to those of complete frameworks under the loading conditions investigated.

Schlagwörter

Stichwörter der Autor:innen

dental implantsfinite element analysis (FEA)framework segmentationfull-arch restorationperi-implant bone stress

Autor:innen und Institutionen

  • Eduardo Anitua Foundation, Vitoria, Spain.
  • R&D Department, Biotechnology Institute I mas D S.L., Vitoria, Spain.

Zitieren

APA

Anitua, E., Armentia, M., & Saracho, L. (2026). Three-dimensional finite element analysis of full-arch implant-supported dental restorations: complete vs. segmented frameworks. Frontiers in Bioengineering and Biotechnology, 14. https://doi.org/10.3389/fbioe.2026.1759007

Vancouver

Anitua E, Armentia M, Saracho L. Three-dimensional finite element analysis of full-arch implant-supported dental restorations: complete vs. segmented frameworks. Frontiers in Bioengineering and Biotechnology. 2026;14. doi:10.3389/fbioe.2026.1759007

BibTeX
@article{Anitua2026,
  author = {Anitua, Eduardo and Armentia, Mikel and Saracho, Luis},
  title = {Three-dimensional finite element analysis of full-arch implant-supported dental restorations: complete vs. segmented frameworks},
  journal = {Frontiers in Bioengineering and Biotechnology},
  year = {2026},
  volume = {14},
  doi = {10.3389/fbioe.2026.1759007}
}
Kostenlos starten →