EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation of crystalline lens overshooting: ex vivo experiment and optomechanical simulation results

Ali Dahaghin, Milad Salimibani, Agnieszka Boszczyk, Agnieszka Jóźwik, Marta Skrok, Jorge Grasa, Damian Siedlecki

Frontiers in Bioengineering and Biotechnology · 09.04.2024 · 12

DOI: 10.3389/fbioe.2024.1348774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 09.04.2024. Verfasst von Ali Dahaghin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Optics and Photonics, Wroclaw University of Science and Technology, Wrocław, Poland. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Introduction

Crystalline lens overshooting refers to a situation in which the lens momentarily shifts too much from its typical location immediately after stopping the rotational movement of the eye globe. This movement can be observed using an optical technique called Purkinje imaging.

Methods

In this work, an experimental setup was designed to reproduce this effect ex vivo using a fresh porcine eye. The sample was rotated 90° around its centroid using a high-velocity rotation stage, and the Purkinje image sequences were recorded, allowing us to quantify the overshooting effect. The numerical part of the study consisted of developing a computational model of the eye, based on the finite element method, that allowed us to understand the biomechanical behavior of the different tissues in this dynamic scenario. A 2D fluid–structure interaction model of the porcine eye globe, considering both the solid parts and humors, was created to reproduce the experimental outcomes.

Results

Outputs of the simulation were analyzed using an optical simulation software package to assess whether the mechanical model behaves optically like the real ex vivo eye. The simulation predicted the experimental results by carefully adjusting the mechanical properties of the zonular fibers and the damping factor.

Conclusion

This study effectively demonstrates the importance of characterizing the dynamic mechanical properties of the eye tissues to properly comprehend and predict the overshooting effect.

Schlagwörter

Stichwörter der Autor:innen

Purkinje imagingfinite-element methodfluid–structure interactioninertial motionovershootingporcine crystalline lenswobbling

Autor:innen und Institutionen

  • Department of Optics and Photonics, Wroclaw University of Science and Technology, Wrocław, Poland.
  • Aragón Institute of Engineering Research (I3A), University of Zaragoza, Zaragoza, Spain.
  • Centro de Investigación Biomédica en Red en Bioingeniería, Biomateriales y Nanomedicina (CIBER-BBN), Zaragoza, Spain.

Zitieren

APA

Dahaghin, A., Salimibani, M., Boszczyk, A., Jóźwik, A., Skrok, M., Grasa, J., & Siedlecki, D. (2024). Investigation of crystalline lens overshooting: ex vivo experiment and optomechanical simulation results. Frontiers in Bioengineering and Biotechnology, 12. https://doi.org/10.3389/fbioe.2024.1348774

Vancouver

Dahaghin A, Salimibani M, Boszczyk A, Jóźwik A, Skrok M, Grasa J, et al. Investigation of crystalline lens overshooting: ex vivo experiment and optomechanical simulation results. Frontiers in Bioengineering and Biotechnology. 2024;12. doi:10.3389/fbioe.2024.1348774

BibTeX
@article{Dahaghin2024,
  author = {Dahaghin, Ali and Salimibani, Milad and Boszczyk, Agnieszka and Jóźwik, Agnieszka and Skrok, Marta and Grasa, Jorge and Siedlecki, Damian},
  title = {Investigation of crystalline lens overshooting: ex vivo experiment and optomechanical simulation results},
  journal = {Frontiers in Bioengineering and Biotechnology},
  year = {2024},
  volume = {12},
  doi = {10.3389/fbioe.2024.1348774}
}
Kostenlos starten →