Research on adaptive impedance control technology of upper limb rehabilitation robot based on impedance parameter prediction
Frontiers in Bioengineering and Biotechnology · 03.01.2024 · 11
DOI: 10.3389/fbioe.2023.1332689 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 03.01.2024. Verfasst von Yuling Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Health Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China. Die Arbeit wurde bisher 34-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Introduction
With the aggravation of aging and the growing number of stroke patients suffering from hemiplegia in China, rehabilitation robots have become an integral part of rehabilitation training. However, traditional rehabilitation robots cannot modify the training parameters adaptively to match the upper limbs’ rehabilitation status automatically and apply them in rehabilitation training effectively, which will improve the efficacy of rehabilitation training.
Methods
In this study, a two-degree-of-freedom flexible drive joint rehabilitation robot platform was built. The forgetting factor recursive least squares method (FFRLS) was utilized to estimate the impedance parameters of human upper limb end. A reward function was established to select the optimal stiffness parameters of the rehabilitation robot.
Results
The results confirmed the effectiveness of the adaptive impedance control strategy. The findings of the adaptive impedance control studies showed that the adaptive impedance control had a significantly greater reward than the constant impedance control, which was in line with the simulation results of the variable impedance control. Moreover, it was observed that the levels of robot assistance could be suitably modified based on the subject’s different participation.
Discussion
The results facilitated stroke patients’ upper limb rehabilitation by enabling the rehabilitation robot to adaptively change the impedance parameters according to the functional status of the affected limb. In clinic therapy, the proposed control strategy may help to adjust the reward function for different patients to improve the rehabilitation efficacy eventually.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Health Science and Engineering, University of Shanghai for Science and Technology, Shanghai, China.
- Shanghai Engineering Research Center of Assistive Devices, Shanghai, China.
- School of Mechanical and Automotive Engineering, Shanghai University of Engineering Science, Shanghai, China.
Zitieren
APA
Zhang, Y., Li, T., Tao, H., Liu, F., Hu, B., Wu, M., & Yu, H. (2024). Research on adaptive impedance control technology of upper limb rehabilitation robot based on impedance parameter prediction. Frontiers in Bioengineering and Biotechnology, 11. https://doi.org/10.3389/fbioe.2023.1332689
Vancouver
Zhang Y, Li T, Tao H, Liu F, Hu B, Wu M, et al. Research on adaptive impedance control technology of upper limb rehabilitation robot based on impedance parameter prediction. Frontiers in Bioengineering and Biotechnology. 2024;11. doi:10.3389/fbioe.2023.1332689
BibTeX
@article{Zhang2024,
author = {Zhang, Yuling and Li, Tong and Tao, Haoran and Liu, Fengchen and Hu, Bingshan and Wu, Minghui and Yu, Hongliu},
title = {Research on adaptive impedance control technology of upper limb rehabilitation robot based on impedance parameter prediction},
journal = {Frontiers in Bioengineering and Biotechnology},
year = {2024},
volume = {11},
doi = {10.3389/fbioe.2023.1332689}
}
EUVIMED