Dynamic assessment for low back-support exoskeletons during manual handling tasks
Frontiers in Bioengineering and Biotechnology · 10.11.2023 · 11
DOI: 10.3389/fbioe.2023.1289686 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 10.11.2023. Verfasst von Xiaohan Xiang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Agricultural Machinery, National Agriculture and Food Research Organization (NARO), Saitama, Japan. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Japan Society for the Promotion of Science.
Abstract (Originalsprache)
Exoskeletons can protect users’ lumbar spine and reduce the risk of low back injury during manual lifting tasks. Although many exoskeletons have been developed, their adoptability is limited by their task- and movement-specific effects on reducing burden. Many studies have evaluated the safety and effectiveness of an exoskeleton using the peak/mean values of biomechanical variables, whereas the performance of the exoskeleton at other time points of the movement has not been investigated in detail. A functional analysis, which presents discrete time-series data as continuous functions, makes it possible to highlight the features of the movement waveform and determine the difference in each variable at each time point. This study investigated an assessment method for exoskeletons based on functional ANOVA, which made it possible to quantify the differences in the biomechanical variables throughout the movement when using an exoskeleton. Additionally, we developed a method based on the interpolation technique to estimate the assistive torque of an exoskeleton. Ten men lifted a 10-kg box under symmetric and asymmetric conditions five times each. Lumbar load was significantly reduced during all phases (flexion, lifting, and laying) under both conditions. Additionally, reductions in kinematic variables were observed, indicating the exoskeleton’s impact on motion restrictions. Moreover, the overlap F-ratio curves of the lumbar load and kinematic variables imply that exoskeletons reduce the lumbar load by restricting the kinematic variables. The results suggested that at smaller trunk angles (<25°), an exoskeleton neither significantly reduces the lumbar load nor restricts trunk movement. Our findings will help increasing exoskeleton safety and designing effective products for reducing lumbar injury risks.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute of Agricultural Machinery, National Agriculture and Food Research Organization (NARO), Saitama, Japan.
Förderung
- Japan Society for the Promotion of Science
Zitieren
APA
Xiang, X., Tanaka, M., Umeno, S., Kikuchi, Y., & Kobayashi, Y. (2023). Dynamic assessment for low back-support exoskeletons during manual handling tasks. Frontiers in Bioengineering and Biotechnology, 11. https://doi.org/10.3389/fbioe.2023.1289686
Vancouver
Xiang X, Tanaka M, Umeno S, Kikuchi Y, Kobayashi Y. Dynamic assessment for low back-support exoskeletons during manual handling tasks. Frontiers in Bioengineering and Biotechnology. 2023;11. doi:10.3389/fbioe.2023.1289686
BibTeX
@article{Xiang2023,
author = {Xiang, Xiaohan and Tanaka, Masahiro and Umeno, Satoru and Kikuchi, Yutaka and Kobayashi, Yoshihiko},
title = {Dynamic assessment for low back-support exoskeletons during manual handling tasks},
journal = {Frontiers in Bioengineering and Biotechnology},
year = {2023},
volume = {11},
doi = {10.3389/fbioe.2023.1289686}
}
EUVIMED