The response of human macrophages to 3D printed titanium antibacterial implants does not affect the osteogenic differentiation of hMSCs
Frontiers in Bioengineering and Biotechnology · 21.06.2023 · 11
DOI: 10.3389/fbioe.2023.1176534 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 21.06.2023. Verfasst von Amaia Garmendia Urdalleta und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, TU Delft, Delft, Netherlands. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Macrophage responses following the implantation of orthopaedic implants are essential for successful implant integration in the body, partly through intimate crosstalk with human marrow stromal cells (hMSCs) in the process of new bone formation. Additive manufacturing (AM) and plasma electrolytic oxidation (PEO) in the presence of silver nanoparticles (AgNPs) are promising techniques to achieve multifunctional titanium implants. Their osteoimmunomodulatory properties are, however, not yet fully investigated. Here, we studied the effects of implants with AgNPs on human macrophages and the crosstalk between hMSCs and human macrophages when co-cultured in vitro with biofunctionalised AM Ti6Al4V implants. A concentration of 0.3 g/L AgNPs in the PEO electrolyte was found to be optimal for both macrophage viability and inhibition of bacteria growth. These specimens also caused a decrease of the macrophage tissue repair related factor C-C Motif Chemokine Ligand 18 (CCL18). Nevertheless, co-cultured hMSCs could osteogenically differentiate without any adverse effects caused by the presence of macrophages that were previously exposed to the PEO (±AgNPs) surfaces. Further evaluation of these promising implants in a bony in vivo environment with and without infection is highly recommended to prove their potential for clinical use.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Biomechanical Engineering, Faculty of Mechanical, Maritime and Materials Engineering, TU Delft, Delft, Netherlands.
- Department of Oral and Maxillofacial Surgery, Erasmus MC, University Medical Center Rotterdam, Rotterdam, Netherlands.
- Department of Orthopaedics, Erasmus MC, University Medical Center Rotterdam, Rotterdam, Netherlands.
- Department of Applied Science, Technological University of the Shannon: Midlands Midwest, Limerick, Ireland.
- Department of Medical Microbiology and Infectious Diseases, Erasmus MC, University Medical Center Rotterdam, Rotterdam, Netherlands.
Zitieren
APA
Garmendia Urdalleta, A., Van Poll, M., Fahy, N., Witte-Bouma, J., Van Wamel, W., Apachitei, I., Zadpoor, A. A., Fratila-Apachitei, L. E., & Farrell, E. (2023). The response of human macrophages to 3D printed titanium antibacterial implants does not affect the osteogenic differentiation of hMSCs. Frontiers in Bioengineering and Biotechnology, 11. https://doi.org/10.3389/fbioe.2023.1176534
Vancouver
Garmendia Urdalleta A, Van Poll M, Fahy N, Witte-Bouma J, Van Wamel W, Apachitei I, et al. The response of human macrophages to 3D printed titanium antibacterial implants does not affect the osteogenic differentiation of hMSCs. Frontiers in Bioengineering and Biotechnology. 2023;11. doi:10.3389/fbioe.2023.1176534
BibTeX
@article{GarmendiaUrdalleta2023,
author = {Garmendia Urdalleta, Amaia and Van Poll, Mathijs and Fahy, Niamh and Witte-Bouma, Janneke and Van Wamel, Willem and Apachitei, Iulian and Zadpoor, Amir A and Fratila-Apachitei, Lidy E and Farrell, Eric},
title = {The response of human macrophages to 3D printed titanium antibacterial implants does not affect the osteogenic differentiation of hMSCs},
journal = {Frontiers in Bioengineering and Biotechnology},
year = {2023},
volume = {11},
doi = {10.3389/fbioe.2023.1176534}
}
EUVIMED