EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of blade loading distribution on hub leakage flow of cantilevered stator

Yaqi Liu, Hefang Deng, Jinfang Teng, Mingmin Zhu, Songan Zhang, Shaopeng Lu

Journal of the Global Power and Propulsion Society · 24.02.2026 · 10 · 12-28

DOI: 10.33737/jgpps/207503 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Global Power and Propulsion Society, online erschienen am 24.02.2026. Verfasst von Yaqi Liu und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The hub leakage flow of cantilevered stators has a significant impact and aerodynamic stability of the axial compressor. The formation and development of the hub leakage flow are affected by the blade loading level and distribution, but the internal mechanism of this effect is not fully understood in previous studies. This paper uses a novel experiment facility with a high-speed moving endwall and numerical simulation methods to focus on the influence of a fore-loading and highly-loaded cantilevered cascade on the hub leakage flow and its mechanism, and compared with a typical middle-loading controlled diffusion airfoil cascade. The results demonstrate that although the two cascades have different blade loading levels, the radial distribution of the entropy loss coefficient at the condition of moving endwall is almost identical, which is related to the development location and radial extent of the leakage flow in the two cascades. The position of maximum hub leakage flow rate is delayed relative to the position of maximum blade loading, due to the increase of circumferential momentum by the leakage vortex in the passage. The main cause for the entropy loss is the coupling effect between the product of the leakage flow velocity and injected angle and the mainstream velocity. Based on the findings of this paper, for the hub airfoil of the cantilevered stator, the fore-loading airfoil design can achieve higher loading capacity when the outlet entropy loss distribution is similar. This provides a useful idea for the design of cantilevered stators.

Zitieren

APA

Liu, Y., Deng, H., Teng, J., Zhu, M., Zhang, S., & Lu, S. (2026). Effects of blade loading distribution on hub leakage flow of cantilevered stator. Journal of the Global Power and Propulsion Society, 10, 12-28. https://doi.org/10.33737/jgpps/207503

Vancouver

Liu Y, Deng H, Teng J, Zhu M, Zhang S, Lu S. Effects of blade loading distribution on hub leakage flow of cantilevered stator. Journal of the Global Power and Propulsion Society. 2026;10:12-28. doi:10.33737/jgpps/207503

BibTeX
@article{Liu2026,
  author = {Liu, Yaqi and Deng, Hefang and Teng, Jinfang and Zhu, Mingmin and Zhang, Songan and Lu, Shaopeng},
  title = {Effects of blade loading distribution on hub leakage flow of cantilevered stator},
  journal = {Journal of the Global Power and Propulsion Society},
  year = {2026},
  volume = {10},
  pages = {12--28},
  doi = {10.33737/jgpps/207503}
}
Kostenlos starten →