EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

DEVELOPMENT OF LIQUEFACTION HAZARD MAP FOR DINAJPUR MUNICIPALITY, BANGLADESH

Md. Mahabub Rahman, Sonu Thakur, Syed Tanvir Ahmed, Abu Sayed

Journal of Civil Engineering, Science and Technology · 30.04.2026 · 17 (1) · 19-29

DOI: 10.33736/jcest.7382.2026 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Civil Engineering, Science and Technology, online erschienen am 30.04.2026. Verfasst von Md. Mahabub Rahman und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The word "earthquake" now denotes a global catastrophic natural event. Dinajpur Municipality is the most susceptible place to earthquake-induced liquefaction due to its geographical location. A crucial component of characterising a geotechnical site is determining the liquefaction resistance of loose saturated sand. The article employs a simplified approach reliant on the Standard Penetration Test's blow count (SPT-N) to evaluate the liquefaction risk triggered by the earthquake in Dinajpur Municipality. SPT data was collected at 78 sites within the study area. The potential risk of liquefaction was assessed at each site for several earthquake magnitudes, including 6, 6.5, 7, 7.5, 8, and 8.5, with a peak horizontal ground acceleration (PGA) of 0.20 g. The liquefaction risk was assessed using an estimated liquefaction potential index (LPI) for each location. The LPI values in the examined region varied from 8.6 to 15.9 for earthquakes of magnitude 8.5, indicating a risk level from moderate to extremely high. The LPI of locations was subsequently utilised to generate a risk map using geospatial approaches. The LPI was determined to be negligible in the middle and central-southern regions of the study area. The liquefaction susceptibility has been assessed as being significant in the northern and southwestern regions of the study sites. These results may be used to improve the subsurface conditions in the study area for the development of earthquake-resistant structures. The created risk map may serve as a significant signal for the Bangladesh government's catastrophe mitigation strategy.

Zitieren

APA

Rahman, M. M., Thakur, S., Ahmed, S. T., & Sayed, A. (2026). DEVELOPMENT OF LIQUEFACTION HAZARD MAP FOR DINAJPUR MUNICIPALITY, BANGLADESH. Journal of Civil Engineering, Science and Technology, 17(1), 19-29. https://doi.org/10.33736/jcest.7382.2026

Vancouver

Rahman MM, Thakur S, Ahmed ST, Sayed A. DEVELOPMENT OF LIQUEFACTION HAZARD MAP FOR DINAJPUR MUNICIPALITY, BANGLADESH. Journal of Civil Engineering, Science and Technology. 2026;17(1):19-29. doi:10.33736/jcest.7382.2026

BibTeX
@article{Rahman2026,
  author = {Rahman, Md. Mahabub and Thakur, Sonu and Ahmed, Syed Tanvir and Sayed, Abu},
  title = {DEVELOPMENT OF LIQUEFACTION HAZARD MAP FOR DINAJPUR MUNICIPALITY, BANGLADESH},
  journal = {Journal of Civil Engineering, Science and Technology},
  year = {2026},
  volume = {17},
  number = {1},
  pages = {19--29},
  doi = {10.33736/jcest.7382.2026}
}
Kostenlos starten →