Initial Surface Absorption of Pozzolan and Polymer Modified Mortar
Journal of Civil Engineering, Science and Technology · 2013
DOI: 10.33736/jcest.103.2013 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Civil Engineering, Science and Technology, 2013. Verfasst von Lau Si Kiong und 1 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 8 Literaturangaben.
Abstract (Originalsprache)
This study involves the investigation of water absoption of mortar modified with combinations of polymer and pozzolan by using initial surface water absorption test (ISAT). Since surface of mortar or concrete serves as medium that will be most easily penetrated by moisture that can cause corrosion of reinforcement bars that leads to durability problem, it is imperative to make it durable.Polymer additive and pozzolanic cement replacement used in this study was Styrene Butadiene Rubber (SBR) and Fly Ash (FA) respectively. Mixes were prepared with two water to cement ratios (w/c) of 0.3 and 0.4 with different combinations of 5%, 7% & 10% SBR additive and 10%, 20% and 30% FA cement replacement. Results showed that modified mortar with combination of higher percentages of polymer additive and lower percentages of pozzolonic cement replacement have the lowest initial surface absorption rate compare to unmodified mortar. It can be concluded based on this study that high percentage of polymer addition and low percentage of pozzolanic cement replacement in mortar can enhance its resistance to water absorption.
Zitieren
APA
Kiong, L. S., & Sutan, N. M. (2013). Initial Surface Absorption of Pozzolan and Polymer Modified Mortar. Journal of Civil Engineering, Science and Technology. https://doi.org/10.33736/jcest.103.2013
Vancouver
Kiong LS, Sutan NM. Initial Surface Absorption of Pozzolan and Polymer Modified Mortar. Journal of Civil Engineering, Science and Technology. 2013. doi:10.33736/jcest.103.2013
BibTeX
@article{Kiong2013,
author = {Kiong, Lau Si and Sutan, Norsuzailina Mohamed},
title = {Initial Surface Absorption of Pozzolan and Polymer Modified Mortar},
journal = {Journal of Civil Engineering, Science and Technology},
year = {2013},
doi = {10.33736/jcest.103.2013}
}
EUVIMED