Design of Ballistics Armor Using Additive Manufacturing of Kevlar Material
SAMPE Journal · 01.06.2026 · 62 (3) · 42-53
DOI: 10.33599/sj.v62no3.04 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAMPE Journal, online erschienen am 01.06.2026. Verfasst von Roha Ali und 3 weiteren Autor:innen.
Abstract (Originalsprache)
This project evaluates the effectiveness of various geometries created using advanced additive manufacturing (AM) of Kevlar fiber and chopped carbon fiber-reinforced filament for ballistic protection applications. This study expands on sandwich panel designs with woven Kevlar face sheets and investigates an optimal fiber-reinforced filament-core structure. A unit cell workflow was developed in nTop (nTop, New York, NY, USA) to leverage its custom cell modeling and Finite Element Analysis (FEA) capabilities. Unit cell types were simulated and tested from the hexagonal honeycomb, gyroid Triply Periodic Minimal Surface (TPMS), and re-entrant auxetic cell families. Core structure thickness and cell size were additive manufacturing parameters that were varied to assess impact absorption. Moreover, the additively manufactured cell structures were encapsulated with a damping material, particularly silica. To determine the best type of silica for ballistic applications, three types of silica with varying tensile strengths were molded into shapes matching the cores. The samples were then tensile tested using an Instron 8801 universal testing machine (Instron, Norwood, MA, USA) to determine which offered the best balance between strength and ductility. The experimental approach began by determining the material characteristics for test coupons for both continuous fiber and chopped fiber in 0- and 90-degree filament orientations. A technology demonstration was also conducted by performing ballistic testing in a shooting range with 9 mm rounds to assess failure modes of the fabricated cellular structures based on these ballistic impacts.
Zitieren
APA
Ali, R., Bride, J., Jimenez, J., & Elghandour, E. (2026). Design of Ballistics Armor Using Additive Manufacturing of Kevlar Material. SAMPE Journal, 62(3), 42-53. https://doi.org/10.33599/sj.v62no3.04
Vancouver
Ali R, Bride J, Jimenez J, Elghandour E. Design of Ballistics Armor Using Additive Manufacturing of Kevlar Material. SAMPE Journal. 2026;62(3):42-53. doi:10.33599/sj.v62no3.04
BibTeX
@article{Ali2026,
author = {Ali, Roha and Bride, Jack and Jimenez, Jedidiah and Elghandour, Eltahry},
title = {Design of Ballistics Armor Using Additive Manufacturing of Kevlar Material},
journal = {SAMPE Journal},
year = {2026},
volume = {62},
number = {3},
pages = {42--53},
doi = {10.33599/sj.v62no3.04}
}
EUVIMED