EUVIMEDEUVIMED entdecken
Crossref

Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks

Mina S. Ghabbour, Xueyong Qu, Jacob I. Rome

SAMPE JOURNAL · 2024

DOI: 10.33599/sj.v60no4.03 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAMPE JOURNAL, 2024. Verfasst von Mina S. Ghabbour und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As the aerospace industry continues to adopt additively manufactured (AM) parts for flight hardware, process simulation becomes more attractive to improve the manufacturing process by understanding how process parameters affect part quality and performance. Process simulation can also be used to predict and prevent build failures before the printing process. The powder bed fusion process of Ti-6Al-4V material is modeled using commercial finite element software to simulate the selective laser melting process. The thermal history is obtained from transient heat transfer analysis. Both the inherent strain approach and a sequential thermal-mechanical approach are employed to predict residual stress and part distortion. A National Agency for Finite Element Methods and Standards (NAFEMS) benchmark problem is presented as a numerical example. It is a thin wall structure with geometry features that can lead to part defects due to thermal distortion. It is shown that both analysis approaches are able to capture the thin-member bridging behavior, stepping behavior, and general distortion contour plot as those published by NAFEMS.

Zitieren

APA

Ghabbour, M. S., Qu, X., & Rome, J. I. (2024). Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks. SAMPE JOURNAL. https://doi.org/10.33599/sj.v60no4.03

Vancouver

Ghabbour MS, Qu X, Rome JI. Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks. SAMPE JOURNAL. 2024. doi:10.33599/sj.v60no4.03

BibTeX
@article{Ghabbour2024,
  author = {Ghabbour, Mina S. and Qu, Xueyong and Rome, Jacob I.},
  title = {Additive Manufacturing Process Simulation of Laser Powder Bed Fusion and Benchmarks},
  journal = {SAMPE JOURNAL},
  year = {2024},
  doi = {10.33599/sj.v60no4.03}
}
Kostenlos starten →