Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study
SAMPE JOURNAL · 2023
DOI: 10.33599/sj.v59no6.01 ↗Kurz gefasst
Fachartikel in der Zeitschrift SAMPE JOURNAL, 2023. Verfasst von Joseph P. Heil und 7 weiteren Autor:innen.
Abstract (Originalsprache)
Spirit AeroSystems is developing a thermoplastic technology demonstrator featuring an out of autoclave fabrication approach. Furthermore, the intent is to demonstrate the capability in the United States and preferably at our own domestic facility. The chosen configuration is a fuselage skin panel about 1.2 m wide and 2.2 m long with five stringers and four frames. Laser assisted thermoplastic Automated Fiber Placement (AFP) is used to manufacture the skin; stringers are stamp formed, and frames used two fabrication paths: stamp forming and oven consolidation. Co-Fusion simultaneously consolidates the skin and welds stringers to the skin followed by a separate frame welding process.
Zitieren
APA
Heil, J. P., Wadsworth, M. A., Dando, K. R., Jones, R. E., Tymes, M., Slater, S. J., Bahr, R. E., & Bearden, B. T. (2023). Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study. SAMPE JOURNAL. https://doi.org/10.33599/sj.v59no6.01
Vancouver
Heil JP, Wadsworth MA, Dando KR, Jones RE, Tymes M, Slater SJ, et al. Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study. SAMPE JOURNAL. 2023. doi:10.33599/sj.v59no6.01
BibTeX
@article{Heil2023,
author = {Heil, Joseph P. and Wadsworth, Mark A. and Dando, Kerrick R. and Jones, Ron E. and Tymes, Matt and Slater, Sam J and Bahr, Rodney E. and Bearden, Bryan T.},
title = {Thermoplastic Composite Rate Enhanced Stiffened Skin: A Case Study},
journal = {SAMPE JOURNAL},
year = {2023},
doi = {10.33599/sj.v59no6.01}
}
EUVIMED