EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Modifikasi Sistem Buka-Tutup Dan Struktur Tulangan Kap Mesin Purwarupa Kendaraan Listrik

Pandoe Pandoe, Antonius Adi Soetopo, Rifki Tri Pangestu

Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 300-309

DOI: 10.33504/jitt.v4i2.458 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Pandoe Pandoe und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The engine hood of the prototype electric vehicle, developed in a previous study, still uses a permanent mounting system, which limits access for inspection and maintenance of the vehicle’s front compartment. This study aims to implement an opening-closing system and a reinforcement structure for the hood using 1 mm-thick Steel Plate Cold Commercial (SPCC). The research was conducted through the following stages: design using SolidWorks 2022; fabrication of the hood panel and reinforcement structure; assembly of the opening-closing mechanism components; and evaluation of the implementation results. The opening-closing mechanism consists of a hood hinge, a hood latch, and a hood support rod, while the reinforcement structure was fabricated using a 25 × 25 × 2 mm hollow square profile. The results of the study indicate that the opening-closing system and the reinforcement structure were successfully implemented according to the design, forming a single structural unit with the hood panel. The reinforcement structure serves to strengthen the panel while also acting as a mounting bracket for the hood hinge and hood latch, whereas the implementation of the opening-closing system improves ease of access to the vehicle’s front compartment for inspection and maintenance compared to the previous design, which used a permanent mounting system. Furthermore, the development of the hood enhances functionality without altering the primary dimensions or the basic concept of the front body of the prototype car.

Zitieren

APA

Pandoe, P., Soetopo, A. A., & Pangestu, R. T. (2026). Modifikasi Sistem Buka-Tutup Dan Struktur Tulangan Kap Mesin Purwarupa Kendaraan Listrik. Jurnal Inovasi Teknologi Terapan, 4(2), 300-309. https://doi.org/10.33504/jitt.v4i2.458

Vancouver

Pandoe P, Soetopo AA, Pangestu RT. Modifikasi Sistem Buka-Tutup Dan Struktur Tulangan Kap Mesin Purwarupa Kendaraan Listrik. Jurnal Inovasi Teknologi Terapan. 2026;4(2):300-309. doi:10.33504/jitt.v4i2.458

BibTeX
@article{Pandoe2026,
  author = {Pandoe, Pandoe and Soetopo, Antonius Adi and Pangestu, Rifki Tri},
  title = {Modifikasi Sistem Buka-Tutup Dan Struktur Tulangan Kap Mesin Purwarupa Kendaraan Listrik},
  journal = {Jurnal Inovasi Teknologi Terapan},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {300--309},
  doi = {10.33504/jitt.v4i2.458}
}
Kostenlos starten →