EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Pembuatan Komposit Matrik Resin Fenolik Di Perkuat Paduan Logam Dan Bagasse Ash Menggunakan Metode Metalurgi Serbuk

Muhammad Fadhil, Sukanto Sukanto, Erwanto Erwanto, Abdul Budi, Agus Wanto

Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 277-285

DOI: 10.33504/jitt.v4i2.385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Muhammad Fadhil und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aims to develop phenolic resin-based composite materials with the addition of aluminum, brass, silica, and bagasse ash powders as reinforcing materials, using powder metallurgy methods. The specimen manufacturing process was carried out through mixing stages using a ball mill, hot compaction with pressure variations of 5000 psi, 53 00 psi, and 5600 psi, and sintering at a temperature of 130°C for 10 minutes. The tests were conducted at the Mechanical Engineering Laboratory of the Bangka Belitung State Polytechnic, including hardness tests (ASTM E110-14) and density tests (ASTM B962-17). The results showed that the pressing pressure and composition variations had a significant effect on the mechanical properties of the composite. The highest hardness value was obtained at a composition of 35% with a pressure of 5600 psi, while the optimal density was obtained at a composition of 31% with a pressure of 5300 psi. Overall, the combination of the right process parameters proved to be able to improve the quality of the composite, so that this material has the potential to be used as an alternative to asbestos-based brake pads.

Zitieren

APA

Fadhil, M., Sukanto, S., Erwanto, E., Budi, A., & Wanto, A. (2026). Pembuatan Komposit Matrik Resin Fenolik Di Perkuat Paduan Logam Dan Bagasse Ash Menggunakan Metode Metalurgi Serbuk. Jurnal Inovasi Teknologi Terapan, 4(2), 277-285. https://doi.org/10.33504/jitt.v4i2.385

Vancouver

Fadhil M, Sukanto S, Erwanto E, Budi A, Wanto A. Pembuatan Komposit Matrik Resin Fenolik Di Perkuat Paduan Logam Dan Bagasse Ash Menggunakan Metode Metalurgi Serbuk. Jurnal Inovasi Teknologi Terapan. 2026;4(2):277-285. doi:10.33504/jitt.v4i2.385

BibTeX
@article{Fadhil2026,
  author = {Fadhil, Muhammad and Sukanto, Sukanto and Erwanto, Erwanto and Budi, Abdul and Wanto, Agus},
  title = {Pembuatan Komposit Matrik Resin Fenolik Di Perkuat Paduan Logam Dan Bagasse Ash Menggunakan Metode Metalurgi Serbuk},
  journal = {Jurnal Inovasi Teknologi Terapan},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {277--285},
  doi = {10.33504/jitt.v4i2.385}
}
Kostenlos starten →