EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Interface Engineering and Defect Tolerance in RbSnBr₃ Perovskite Solar Cells: A Numerical Analysis of HTL Impact

Abdul Mateen Arshad, A. Ali, Mohsin M Tarar, Mohsin Ali, SU Rahman

International Journal of Innovations in Science and Technology · 28.09.2026 · 8 (7) · 3050

DOI: 10.33411/ijist/2060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Innovations in Science and Technology, online erschienen am 28.09.2026. Verfasst von Abdul Mateen Arshad und 4 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a systematic SCAPS-1D investigation of the influence of five hole transport layers (HTLs), namely CuSCN, Cu2O, P3HT, PTAA, and PEDOT:PSS, on the interface energetics, charge transport, defect tolerance, and photovoltaic performance of lead-free RbSnBr₃ perovskite solar cells employing the FTO/SnS₂/ RbSnBr₃/ HTL/ Au device architecture. To isolate the intrinsic influence of HTL properties, all device parameters, interfaces, and operating conditions were kept identical except for the HTL material. Unlike conventional HTL-screening studies that primarily compare photovoltaic performance, the present work integrates analyses of energy-band alignment, current–voltage (J–V), quantum efficiency (QE), capacitance–voltage (C–V), conductance–voltage (G–V), density of states, carrier mobility, contact engineering, bulk and interface defects, and temperature-dependent characteristics to establish the physical relationship between HTL properties and device operation. PEDOT: PSS and P3HT exhibited comparable simulated photovoltaic performances, achieving power conversion efficiencies (PCEs) of 22.87% and 22.86%, respectively. Their favorable performance is attributed to suitable energy-band alignment, efficient hole extraction, balanced carrier transport, and reduced recombination under the investigated simulation conditions. The integrated analyses demonstrate that HTL selection governs device behavior primarily through interface-controlled electrical processes, while the sensitivity to the assumed defect conditions further influences carrier recombination and overall device performance. These findings provide a comprehensive physical understanding of HTL-controlled interface engineering in lead-free RbSnBr₃ perovskite solar cells and offer theoretical guidance for their future experimental optimization.

Zitieren

APA

Arshad, A. M., Ali, A., Tarar, M. M., Ali, M., & Rahman, S. (2026). Interface Engineering and Defect Tolerance in RbSnBr₃ Perovskite Solar Cells: A Numerical Analysis of HTL Impact. International Journal of Innovations in Science and Technology, 8(7), 3050. https://doi.org/10.33411/ijist/2060

Vancouver

Arshad AM, Ali A, Tarar MM, Ali M, Rahman S. Interface Engineering and Defect Tolerance in RbSnBr₃ Perovskite Solar Cells: A Numerical Analysis of HTL Impact. International Journal of Innovations in Science and Technology. 2026;8(7):3050. doi:10.33411/ijist/2060

BibTeX
@article{Arshad2026,
  author = {Arshad, Abdul Mateen and Ali, A. and Tarar, Mohsin M and Ali, Mohsin and Rahman, SU},
  title = {Interface Engineering and Defect Tolerance in RbSnBr₃ Perovskite Solar Cells: A Numerical Analysis of HTL Impact},
  journal = {International Journal of Innovations in Science and Technology},
  year = {2026},
  volume = {8},
  number = {7},
  pages = {3050},
  doi = {10.33411/ijist/2060}
}
Kostenlos starten →