An IOT Enabled and Computer Vision Integrated Adaptive Street Lighting System: Prototype Design and Validation
Light & Engineering · 25.06.2026 · 13
DOI: 10.33383/2025-063 ↗Kurz gefasst
Fachartikel in der Zeitschrift Light & Engineering, online erschienen am 19.06.2026. Verfasst von Tanumay Halder und 1 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.
Abstract (Originalsprache)
This article presents a prototype design and experimental validation of intelligent control of a street light luminaire containing CW (cool white) and WW (warm white) LED based on human or object detection, motion, and weather conditions. The system is mainly controlled by a Raspberry Pi 5(RPi 5) integrated with a wireless CCTV camera for obtaining real-time object presence and speed estimation, along with a DHT11 sensor and LDR for temperature, humidity, and light level detection, and sensing of fog and rain from a weather application programming interface (API). The designed system uses vision-based object detection, determines the type and speed of object movement, and then dynamically adjusts the LED light output, consists of alternate array of CW and WW LED arrays, based on the required illuminance on road surface corresponding to the object's speed. On the other hand, it senses weather behaviour from weather API data to generate control signal and transfer via IoT network to ESP8266 to switch between CW and WW LEDs in a single LED module. In this system, sensor fusion techniques are used to correlate environmental parameters to actuate the situation demanded light level. A hardware prototype is designed and experimentally tested in a controlled environmental scenario to evaluate system response time, light output adjustment variation with speed, and lighting performance under dynamic weather conditions. This control setup helps to develop a smart street lighting solution as well as to provide suitable visual conditions and safety to support the development of a smart city.
Zitieren
APA
Halder, T., & Roy, B. (2026). An IOT Enabled and Computer Vision Integrated Adaptive Street Lighting System: Prototype Design and Validation. Light & Engineering, 13. https://doi.org/10.33383/2025-063
Vancouver
Halder T, Roy B. An IOT Enabled and Computer Vision Integrated Adaptive Street Lighting System: Prototype Design and Validation. Light & Engineering. 2026:13. doi:10.33383/2025-063
BibTeX
@article{Halder2026,
author = {Halder, Tanumay and Roy, Biswanath},
title = {An IOT Enabled and Computer Vision Integrated Adaptive Street Lighting System: Prototype Design and Validation},
journal = {Light & Engineering},
year = {2026},
pages = {13},
doi = {10.33383/2025-063}
}
EUVIMED