EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Teknologi Kendali Otomatis Pemotong Pisang Untuk Produksi Keripik Berbasis Arduino

Irham Iswanda Duhair, S. Samsugi Samsugi, Heni Sulistiani

Jurnal Teknik dan Sistem Komputer · 27.01.2026 · 6 (2) · 27-37

DOI: 10.33365/jtikom.v6i2.841 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik dan Sistem Komputer, online erschienen am 27.01.2026. Verfasst von Irham Iswanda Duhair und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Banana chip production by micro, small, and medium enterprises (MSMEs) generally relies on manual cutting, which is often inefficient, prone to hand injuries, and produces slices with inconsistent thickness. This research aims to design and develop an Arduino-based automatic banana cutting system to increase productivity, time efficiency, and standardize chip slices. The system is controlled by an Arduino Uno, which receives signals from two limit switches and a stepper motor as a driver. When the driver touches the limit switch, it reverses direction. Cutting results were tested on Kepok bananas, with a cutting thickness of 1-3 mm. Test results showed that this tool is capable of producing cuts with a thickness of 1-3 mm on Kepok bananas, without relying on the operator's hand strength. It provides an automatic mechanism that reduces the risk of hand injuries and direct contact with banana sap. Thus, the application of Arduino-based automatic control technology significantly improves the banana chip cutting process, improving work efficiency, more consistent results, and ensuring operator safety. Keywords: Banana, Limit Switch, Stepper Motor, Cutting

Zitieren

APA

Duhair, I. I., Samsugi, S. S., & Sulistiani, H. (2026). Teknologi Kendali Otomatis Pemotong Pisang Untuk Produksi Keripik Berbasis Arduino. Jurnal Teknik dan Sistem Komputer, 6(2), 27-37. https://doi.org/10.33365/jtikom.v6i2.841

Vancouver

Duhair II, Samsugi SS, Sulistiani H. Teknologi Kendali Otomatis Pemotong Pisang Untuk Produksi Keripik Berbasis Arduino. Jurnal Teknik dan Sistem Komputer. 2026;6(2):27-37. doi:10.33365/jtikom.v6i2.841

BibTeX
@article{Duhair2026,
  author = {Duhair, Irham Iswanda and Samsugi, S. Samsugi and Sulistiani, Heni},
  title = {Teknologi Kendali Otomatis Pemotong Pisang Untuk Produksi Keripik Berbasis Arduino},
  journal = {Jurnal Teknik dan Sistem Komputer},
  year = {2026},
  volume = {6},
  number = {2},
  pages = {27--37},
  doi = {10.33365/jtikom.v6i2.841}
}
Kostenlos starten →