EUVIMEDEUVIMED entdecken
Crossref

Assessment of calcined marble waste utilization as an eco-efficient aggregate in concrete production

Yasir Nussrat Shukur, Wael R Abdellah, Moatasem Mostafa Khalefa, Salah A Bader, Mahrous A.M. Ali

Mining of Mineral Deposits · 30.06.2026 · 20 (2) · 13-21

DOI: 10.33271/mining20.02.013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Mining of Mineral Deposits, online erschienen am 30.06.2026. Verfasst von Yasir Nussrat Shukur und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

This study investigates the feasibility of using calcined marble cutting residues as a partial substitute for fine aggregates in concrete to improve material sustainability while maintaining mechanical performance. The research aims to evaluate the effects of incorporating marble waste on strength properties and to determine an optimal substitution ratio suitable for practical applications.

Methods

Marble cutting residues were collected, dried, and calcined at 750°C, then ground into a fine powder. The processed material was used to replace natural sand at substitution levels of 0, 5, 10, and 15% by weight. Standard concrete specimens were prepared and cured for 7, 14, and 28 days. Compressive, flexural, and splitting tensile strength tests were conducted in accordance with relevant standards. Microstructural observations were performed to analyze particle distribution, interfacial bonding, and pore structure.

Findings

The results indicate that concrete containing 5% calcined marble waste achieved a 28-day compressive strength of 38.6 MPa, compared with 39.2 MPa for the control mixture. Flexural and tensile strengths at this replacement level varied by less than 4%. In contrast, higher replacement ratios of 10 and 15% reduced strength by up to 12%, primarily due to increased porosity and reduced packing efficiency. Originality. This study provides systematic experimental evidence on the mechanical and microstructural behavior of concrete containing thermally treated marble residues. Practical implications. The findings confirm that limited substitution of natural sand with calcined marble waste can be safely used in concrete production, supporting waste valorization, resource conservation, and environmentally sustainable construction practices.

Zitieren

APA

Shukur, Y. N., Abdellah, W. R., Khalefa, M. M., Bader, S. A., & Ali, M. A. (2026). Assessment of calcined marble waste utilization as an eco-efficient aggregate in concrete production. Mining of Mineral Deposits, 20(2), 13-21. https://doi.org/10.33271/mining20.02.013

Vancouver

Shukur YN, Abdellah WR, Khalefa MM, Bader SA, Ali MA. Assessment of calcined marble waste utilization as an eco-efficient aggregate in concrete production. Mining of Mineral Deposits. 2026;20(2):13-21. doi:10.33271/mining20.02.013

BibTeX
@article{Shukur2026,
  author = {Shukur, Yasir Nussrat and Abdellah, Wael R and Khalefa, Moatasem Mostafa and Bader, Salah A and Ali, Mahrous A.M.},
  title = {Assessment of calcined marble waste utilization as an eco-efficient aggregate in concrete production},
  journal = {Mining of Mineral Deposits},
  year = {2026},
  volume = {20},
  number = {2},
  pages = {13--21},
  doi = {10.33271/mining20.02.013}
}
Kostenlos starten →