EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Integration of Home Automation and Security System Controller with FPGA Implementation

Bryna Ngieng Sing Yii, Nabihah Ahmad, Mohd Helmy Abd Wahab, Warsuzarina Mat Jubadi, Chessda Uttraphan, Syed Zulkarnain Syed Idrus

Annals of Emerging Technologies in Computing · 05.10.2023 · 7 (5) · 1-10

DOI: 10.33166/aetic.2023.05.001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Annals of Emerging Technologies in Computing, online erschienen am 05.10.2023. Verfasst von Bryna Ngieng Sing Yii und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A home automation system is essential for promoting a safe and comfortable living environment and notable energy conservation for the user. However, the system’s favour had been obstructed by cost, power usage, inadequate security, complexity, and no emergency backup power. Current home automation systems with controllers were limited by their number of ports, fixed architecture, non-durable and non-parallel executions. Keeping this in view, integration of home comfort system, security system, and the automatic load transfer switch features are proposed using the base of Cyclone IV E: EP4CE115F29C7 FPGA Board (DE2-115). The top-level module is developed via Verilog Hardware Descriptive Language (HDL) with the bottom-up technique and used test bench for functional verification via ModelSim-Altera. The PWM method was applied to the lighting system to control the dimming of light through its digital signals via a maximum 500000 counter to improve energy efficiency for the proposed design. In this project, 200Hz pulses are successfully simulated to prevent visible flickering of lights in duty cycle generation. The light intensity of 40% and 100% are verified and successfully generated according to the inputs provided by the status of the LDR sensor and IR sensor. The proposed controller gives correct corresponding outputs to the 13 actuators based on the detected input stimuli. The proposed design utilized a total of 162 (

Zitieren

APA

Yii, B. N. S., Ahmad, N., Wahab, M. H. A., Jubadi, W. M., Uttraphan, C., & Idrus, S. Z. S. (2023). Integration of Home Automation and Security System Controller with FPGA Implementation. Annals of Emerging Technologies in Computing, 7(5), 1-10. https://doi.org/10.33166/aetic.2023.05.001

Vancouver

Yii BNS, Ahmad N, Wahab MHA, Jubadi WM, Uttraphan C, Idrus SZS. Integration of Home Automation and Security System Controller with FPGA Implementation. Annals of Emerging Technologies in Computing. 2023;7(5):1-10. doi:10.33166/aetic.2023.05.001

BibTeX
@article{Yii2023,
  author = {Yii, Bryna Ngieng Sing and Ahmad, Nabihah and Wahab, Mohd Helmy Abd and Jubadi, Warsuzarina Mat and Uttraphan, Chessda and Idrus, Syed Zulkarnain Syed},
  title = {Integration of Home Automation and Security System Controller with FPGA Implementation},
  journal = {Annals of Emerging Technologies in Computing},
  year = {2023},
  volume = {7},
  number = {5},
  pages = {1--10},
  doi = {10.33166/aetic.2023.05.001}
}
Kostenlos starten →