Analysis of technologies for applying heat-resistant coatings based on refractory metal silicides in rocket and space technologies
Kosmičeskaâ tehnika. Raketnoe vooruženie · 17.11.2026 · 2026 (1) · 37-48
DOI: 10.33136/stma2026.01.037 ↗Kurz gefasst
Fachartikel in der Zeitschrift Kosmičeskaâ tehnika. Raketnoe vooruženie, online erschienen am 02.11.2026. Verfasst von V. M. Nadtoka und 2 weiteren Autor:innen.
Abstract (Originalsprache)
The article discusses that increasing the specifi c impulse of contemporary aerospace propulsion systems is feasible by raising combustion chamber operating temperatures via an excluded curtain or water cooling. The authors provide an analytical review of advanced heat-resistant coatings based on molybdenum disilicide (MoSi2) and refractory metal silicides, which are considered promising candidates for protecting uncooled combustion chambers of liquid rocket engines manufactured from niobium alloys. The thermodynamic and kinetic mechanisms of high-temperature gas corrosion at temperatures of 1,200 to 1,700 °C are examined, with particular attention to the formation of protective glassy SiO2 fi lms. The principal causes of silicide layer degradation and failure are identifi ed as: (i) the development of microcracks resulting from signifi cant mismatches in thermal expansion coeffi cients between the SiO2 fi lm and the metallic substrate, and (ii) the intensive evaporation of silicon in the form of volatile oxides (SiO) at temperatures exceeding 1,800 °C. The article emphasizes that coating failure parameters depend on composition and microstructural characteristics defi ned by deposition techniques and service conditions. Consequently, developing novel MoSi2-based coating technologies that can operate at 1,700–1,800 °C for extended periods is recognized as a critical and timely research objective. The article comparatively evaluates classical and modern deposition methods, including slurry, diff usion, plasma, and thermal spraying. The vacuum-arc deposition technique is highlighted as particularly promising because it signifi cantly enhances substrate adhesion through a high degree of plasma fl ow ionization. Additionally, the paper analyzes eff ective strategies to mitigate the brittleness of refractory metal silicide cathodes, including arched magnetic fi elds, multicomponent powder targets, and implementation of advanced spark-plasma sintering methods. The fi ndings confi rm the feasibility of developing vacuum-arc technologies to produce durable MoSi2 -based heat-resistant coatings, thereby ensuring reliable protection of niobium alloy combustion chambers in liquid rocket engines.
Zitieren
APA
Nadtoka, V. M., Husarova, I. O., & Kraieva, V. S. (2026). Analysis of technologies for applying heat-resistant coatings based on refractory metal silicides in rocket and space technologies. Kosmičeskaâ tehnika. Raketnoe vooruženie, 2026(1), 37-48. https://doi.org/10.33136/stma2026.01.037
Vancouver
Nadtoka VM, Husarova IO, Kraieva VS. Analysis of technologies for applying heat-resistant coatings based on refractory metal silicides in rocket and space technologies. Kosmičeskaâ tehnika. Raketnoe vooruženie. 2026;2026(1):37-48. doi:10.33136/stma2026.01.037
BibTeX
@article{Nadtoka2026,
author = {Nadtoka, V. M. and Husarova, I. O. and Kraieva, V. S.},
title = {Analysis of technologies for applying heat-resistant coatings based on refractory metal silicides in rocket and space technologies},
journal = {Kosmičeskaâ tehnika. Raketnoe vooruženie},
year = {2026},
volume = {2026},
number = {1},
pages = {37--48},
doi = {10.33136/stma2026.01.037}
}
EUVIMED