EUVIMEDEUVIMED entdecken
Crossref

Full Constraints Shear Testing Technique on Coarse Grained Material

Benedek Sziklai, Máté Sepsi, Valéria Mertinger

Periodica Polytechnica Mechanical Engineering · 17.03.2026 · 70 (1) · 82-88

DOI: 10.3311/ppme.43420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Periodica Polytechnica Mechanical Engineering, online erschienen am 17.03.2026. Verfasst von Benedek Sziklai und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With severe plastic deformation (SPD), ultra-fine grained (UFG) and nanograined materials can be produced. These materials have an exceptionally high yield stress and low strain hardening compared to coarse grained (CG) materials produced by conventional forming techniques. However, with most SPD techniques, only small-sized specimens can be made, which can be insufficient for conventional material testing. A new full constraints shear technique was proposed in a previous paper, where it was tested on UFG material and validated using finite element simulations, analytical, and numerical methods. In this paper, the testing technique was further tested on both UFG and CG materials. The chosen forming methods were the friction assisted lateral extrusion process (FALEP) and cold rolling.

Zitieren

APA

Sziklai, B., Sepsi, M., & Mertinger, V. (2026). Full Constraints Shear Testing Technique on Coarse Grained Material. Periodica Polytechnica Mechanical Engineering, 70(1), 82-88. https://doi.org/10.3311/ppme.43420

Vancouver

Sziklai B, Sepsi M, Mertinger V. Full Constraints Shear Testing Technique on Coarse Grained Material. Periodica Polytechnica Mechanical Engineering. 2026;70(1):82-88. doi:10.3311/ppme.43420

BibTeX
@article{Sziklai2026,
  author = {Sziklai, Benedek and Sepsi, Máté and Mertinger, Valéria},
  title = {Full Constraints Shear Testing Technique on Coarse Grained Material},
  journal = {Periodica Polytechnica Mechanical Engineering},
  year = {2026},
  volume = {70},
  number = {1},
  pages = {82--88},
  doi = {10.3311/ppme.43420}
}
Kostenlos starten →