EUVIMEDEUVIMED entdecken
Crossref

Catalytic and Non-Catalytic Pyrolysis of Pine Wood Residues: A Temperature-Based Study

Tarana Mammadova, Garanfil Ahmadova, Nushaba Aliyeva, Elnura Mammadova

Periodica Polytechnica Chemical Engineering · 19.08.2026

DOI: 10.3311/ppch.43653 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Periodica Polytechnica Chemical Engineering, online erschienen am 19.08.2026. Verfasst von Tarana Mammadova und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Non-catalytic and magnetite-catalyzed pyrolysis of pine wood residues was systematically investigated in a fixed-bed reactor over the temperature range of 400–800 °C to elucidate the effects of temperature and magnetite catalysis on product distribution, composition, and energy quality. Calcined natural magnetite was employed as a low-cost catalyst to enhance cracking and reforming reactions during pyrolysis. Increasing temperature shifted product yields from liquids and char toward permanent gases in both systems; however, magnetite catalysis significantly intensified vapor-phase cracking and reforming reactions. Gas yields increased from 39.2–69.1 wt.% under catalytic conditions, compared to 18.2–54.8 wt.% for non-catalytic pyrolysis. Magnetite markedly reduced CO2 formation and promoted syngas enrichment, with H2, CO, and CH4 contents reaching 19.1, 39.5, and 27.5 vol.% at 800 °C, respectively. As a result, the higher heating value of the gas increased from 16.4–28.9 MJ Nm−3, exceeding that of the non-catalytic system (11.2–24.5 MJ Nm−3). Compositional analysis showed that magnetite catalysis suppressed oxygenated compounds in the liquid phase via enhanced decarboxylation and decarbonylation, while promoting aromatization and polycyclic aromatic hydrocarbon formation; naphthalenes increased to 42.6 wt.% at 800 °C under catalytic conditions. Biochar produced in the presence of magnetite exhibited higher fixed carbon content, lower O/C and H/C ratios, and improved energy density, with a maximum higher heating value of 40.6 MJ kg−1 at 800 °C. These results demonstrate that calcined natural magnetite effectively tailors the biomass pyrolysis toward high-quality syngas, aromatics-rich liquids, and energy-dense biochar, supporting its application in integrated bioenergy systems.

Zitieren

APA

Mammadova, T., Ahmadova, G., Aliyeva, N., & Mammadova, E. (2026). Catalytic and Non-Catalytic Pyrolysis of Pine Wood Residues: A Temperature-Based Study. Periodica Polytechnica Chemical Engineering. https://doi.org/10.3311/ppch.43653

Vancouver

Mammadova T, Ahmadova G, Aliyeva N, Mammadova E. Catalytic and Non-Catalytic Pyrolysis of Pine Wood Residues: A Temperature-Based Study. Periodica Polytechnica Chemical Engineering. 2026. doi:10.3311/ppch.43653

BibTeX
@article{Mammadova2026,
  author = {Mammadova, Tarana and Ahmadova, Garanfil and Aliyeva, Nushaba and Mammadova, Elnura},
  title = {Catalytic and Non-Catalytic Pyrolysis of Pine Wood Residues: A Temperature-Based Study},
  journal = {Periodica Polytechnica Chemical Engineering},
  year = {2026},
  doi = {10.3311/ppch.43653}
}
Kostenlos starten →