Influence of Process Parameters on Rapid Prototype Part Using Response Surface Methodology
Journal of Engineering Technology and Applied Physics · 2019
DOI: 10.33093/jetap.2019.1.1.20 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering Technology and Applied Physics, 2019. Verfasst von Chockalingam Palanisamy und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref).
Abstract (Originalsprache)
In this research the influencing process parameters on fused deposition modelling of Acrylonitrile Butadiene Styrene (ABS) parts were studied. The two process parameters, layer thickness and model interior fill style are studied. The specimens were built, tests carried out to find out the surface roughness quality of the specimens. The results analyzed using Response Surface Methodology (RSM). The result indicates that the specimen Type 1 with the 0.254mm layer thickness and solid model interior fill style is the best specimen among the types of specimens tested.
Zitieren
APA
Palanisamy, C., Chinnasamy, N., & Muthu, K. (2019). Influence of Process Parameters on Rapid Prototype Part Using Response Surface Methodology. Journal of Engineering Technology and Applied Physics. https://doi.org/10.33093/jetap.2019.1.1.20
Vancouver
Palanisamy C, Chinnasamy N, Muthu K. Influence of Process Parameters on Rapid Prototype Part Using Response Surface Methodology. Journal of Engineering Technology and Applied Physics. 2019. doi:10.33093/jetap.2019.1.1.20
BibTeX
@article{Palanisamy2019,
author = {Palanisamy, Chockalingam and Chinnasamy, Natarajan and Muthu, Karthikeyan},
title = {Influence of Process Parameters on Rapid Prototype Part Using Response Surface Methodology},
journal = {Journal of Engineering Technology and Applied Physics},
year = {2019},
doi = {10.33093/jetap.2019.1.1.20}
}
EUVIMED