STUDY OF THE APPLICABILITY OF FORMULAE FOR CALCULATING THE COEFFICIENT OF HYDRAULIC FRICTION FOR CONDITIONS CHARACTERISTIC OF DISTRICT HEATING SYSTEMS
Energy Technologies & Resource Saving · 12.07.2026 · 87 (2) · 118-127
DOI: 10.33070/etars.2.2026.09 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy Technologies & Resource Saving, online erschienen am 12.07.2026. Verfasst von O.H. Pohosov und 1 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The study is devoted to the evaluation of the applicability of various formulas for calculating the coefficient of hydraulic friction in pipelines of district heating systems. Fundamental dependencies such as the Moody diagram and the Colebrook-White equation are considered, as well as a number of empirical universal formulas (notably those of Blasius, Karman-Prandtl, Shifrinson, Nikuradse, Jain-Swamee, Haalland, Manadilli, Goudar-Sonnad, Fanga, Brkić) developed to simplify calculations in various zones of turbulence. Numerical calculations performed using the SciLAB 2025.1.0 software complex were based on typical pipeline diameters and heat transfer velocities typical of heat networks. The methodology included a graphical analysis of the coefficient of friction dependence on the pipe diameter and the Reynolds number, as well as specific pressure losses. A key result is the finding that for real district heating systems, the hydraulic mode is mostly in the quadratic resistance zone. In this zone, the coefficient of friction is largely independent of the Reynolds number (Re > 500 d/Δe), and is determined predominantly by relative roughness. This confirms the possibility of using simpler, obvious empirical dependencies. Comparative analysis of relative errors, relative to the implicit Colebrook-White equation, showed high accuracy of most universal formulas, where errors usually do not exceed 1.5 %. Particularly low relative errors, often less than 0.25 %, were demonstrated by the Fang and Brkić formulas. The study confirms that the high convergence and minimal errors of the simplified universal equations make the choice of a specific formula less critical for engineering calculations in district heating systems, providing practical advantages for the design and optimization of networks. Bibl. 23, Tab. 2, Fig. 6.
Zitieren
APA
Pohosov, O., & Pasichnyk, P. (2026). STUDY OF THE APPLICABILITY OF FORMULAE FOR CALCULATING THE COEFFICIENT OF HYDRAULIC FRICTION FOR CONDITIONS CHARACTERISTIC OF DISTRICT HEATING SYSTEMS. Energy Technologies & Resource Saving, 87(2), 118-127. https://doi.org/10.33070/etars.2.2026.09
Vancouver
Pohosov O, Pasichnyk P. STUDY OF THE APPLICABILITY OF FORMULAE FOR CALCULATING THE COEFFICIENT OF HYDRAULIC FRICTION FOR CONDITIONS CHARACTERISTIC OF DISTRICT HEATING SYSTEMS. Energy Technologies & Resource Saving. 2026;87(2):118-127. doi:10.33070/etars.2.2026.09
BibTeX
@article{Pohosov2026,
author = {Pohosov, O.H. and Pasichnyk, P.O.},
title = {STUDY OF THE APPLICABILITY OF FORMULAE FOR CALCULATING THE COEFFICIENT OF HYDRAULIC FRICTION FOR CONDITIONS CHARACTERISTIC OF DISTRICT HEATING SYSTEMS},
journal = {Energy Technologies & Resource Saving},
year = {2026},
volume = {87},
number = {2},
pages = {118--127},
doi = {10.33070/etars.2.2026.09}
}
EUVIMED