Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm
FUDMA Journal of Engineering and Technology · 31.12.2025 · 1 (2) · 925-931
DOI: 10.33003/mca40a58 ↗Kurz gefasst
Fachartikel in der Zeitschrift FUDMA Journal of Engineering and Technology, online erschienen am 31.12.2025. Verfasst von Olawale J. OLALUYI und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
The use of a sensor controlling water overflow in a tank offers several significant benefits, primarily focusing on water conservation, cost savings, convenience, and safety. This paper discusses the design and implementation of a low-cost, transistor-based water tank overflow alarm (TBWTOA) and a multi-level indicator system (MLIS) that prevent losses by providing real-time monitoring and timely alerts. The system provides a reliable, automated solution to problems associated with manually monitoring water levels. The system employs four conductive probes positioned at low, medium, full, and overflow levels inside the tank. Probes were connected to the base of a BC547 NPN transistor through current-limiting resistors. When water bridges a probe to the common supply, it delivers sufficient base current to saturate the transistor, allowing collector current to flow and illuminate corresponding LEDs: red for low, yellow for medium, blue for full, and green for overflow. At the overflow threshold, the same circuit simultaneously activates a 5V buzzer, producing a loud, continuous audible warning. The circuit operates on a simple 9V DC supply and is assembled in a water-resistant enclosure. Experimental results demonstrated high accuracy and reliability, with LEDs lighting sequentially as the tank filled and the buzzer triggering instantly upon overflow, remaining active until the water level dropped. Response time remained consistently under 1.4 seconds across all levels and multiple tests. The system offers an affordable, very low-maintenance solution for water conservation. The sensor alarm system transforms a manual, error-prone task into a smart, efficient, and reliable process for managing water storage.
Zitieren
APA
OLALUYI, O. J., ADEOGO, J. O., OJO, A. F., & OGINNI, O. T. (2025). Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm. FUDMA Journal of Engineering and Technology, 1(2), 925-931. https://doi.org/10.33003/mca40a58
Vancouver
OLALUYI OJ, ADEOGO JO, OJO AF, OGINNI OT. Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm. FUDMA Journal of Engineering and Technology. 2025;1(2):925-931. doi:10.33003/mca40a58
BibTeX
@article{OLALUYI2025,
author = {OLALUYI, Olawale J. and ADEOGO, Johnson O. and OJO, Aduragbemi F. and OGINNI, Olarewaju T.},
title = {Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm},
journal = {FUDMA Journal of Engineering and Technology},
year = {2025},
volume = {1},
number = {2},
pages = {925--931},
doi = {10.33003/mca40a58}
}
EUVIMED