EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System

Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA

FUDMA Journal of Engineering and Technology · 19.03.2026 · 2 (1) · 88-98

DOI: 10.33003/f6z38a82 ↗

Kurz gefasst

Fachartikel in der Zeitschrift FUDMA Journal of Engineering and Technology, online erschienen am 19.03.2026. Verfasst von Nafisa A. ABDULHAMID und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

By using solar energy to heat air and dry food materials, a solar drying system helps preserve and reduce agricultural produce waste. It also makes it easier to transport dried produce, which improves people's health and well-being. The project's goal is to create a solar dryer with a residual moisture control system that may shorten drying times and yield high-quality goods. Mild steel, collector glass, angle iron, metal sheet, aluminum foil, plywood, steel mesh wire, 12 V fans, and other materials were purchased locally for the production. A solar drying chamber with a rack of four wire mesh (net) trays and a solar collector (air heater) make up the dryer. The solar collector heats the air that enters through the air inlet before directing it into the drying chamber, where it is used for drying (removing the moisture content from the food ingredient or agricultural produce loaded). Temperature and humidity sensors, a control switch, and a 12V fan make up the residual moisture control system. It is anticipated that the dryer, which has a collector area of 0.637 m2, a drying chamber measuring 700 × 1325 × 600 mm, a collector inclination (β) of 20.17 o, insulation thickness (tb) of 1.5 mm, and insolation on the collector (Ic) of 1215.15 W/m2, will dry two to three kilograms of goods. By enlarging the solar collector, current solar food driers can still be made better, particularly in terms of eliminating any remaining moisture and likely storing heat inside the system.

Zitieren

APA

ABDULHAMID, N. A., USMAN, D. D., JAHUN, K. I., SATI, R. J., JAURO, Y. U., HASHIR, A. M., & SHIMBURA, Y. G. (2026). Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System. FUDMA Journal of Engineering and Technology, 2(1), 88-98. https://doi.org/10.33003/f6z38a82

Vancouver

ABDULHAMID NA, USMAN DD, JAHUN KI, SATI RJ, JAURO YU, HASHIR AM, et al. Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System. FUDMA Journal of Engineering and Technology. 2026;2(1):88-98. doi:10.33003/f6z38a82

BibTeX
@article{ABDULHAMID2026,
  author = {ABDULHAMID, Nafisa A. and USMAN, Danladi D. and JAHUN, Kabiru I. and SATI, Rotkangmwa J. and JAURO, Yahaya U. and HASHIR, Abdulmajid M. and SHIMBURA, Yusuf G.},
  title = {Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System},
  journal = {FUDMA Journal of Engineering and Technology},
  year = {2026},
  volume = {2},
  number = {1},
  pages = {88--98},
  doi = {10.33003/f6z38a82}
}
Kostenlos starten →