EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion

Kamardeen A. OGUNBAJO, Benjamin I. UGHEOKE, Ibrahim D. MUHAMMAD, Emmanuel ONCHE

FUDMA Journal of Engineering and Technology · 08.08.2025 · 1 (2) · 97-109

DOI: 10.33003/86qqyh55 ↗

Kurz gefasst

Fachartikel in der Zeitschrift FUDMA Journal of Engineering and Technology, online erschienen am 08.08.2025. Verfasst von Kamardeen A. OGUNBAJO und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research explores the use of upper bound analysis in calculating the extrusion force through u-shaped dies with varying fillet radii, billet lengths, friction coefficients and billet temperatures. Taguchi method was used in design of this experiment which is a four factor four level experiment giving a total of 16 experimental runs and aluminium 3003 was used as the workpiece. Based on these results a model equation was developed to predict the extrusion force. The correlation coefficient and covariance of the data generated, revealed that a positive and direct relationship existed between fillet radius, billet length, friction coefficient and extrusion force, while an inverse and indirect relationship existed between billet temperature and extrusion force. The R2 value was 99.96% and adjusted R2 value of 99.80% and a root mean square error of 0.2137, indicating that the accuracy of the model is good.

Zitieren

APA

OGUNBAJO, K. A., UGHEOKE, B. I., MUHAMMAD, I. D., & ONCHE, E. (2025). Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion. FUDMA Journal of Engineering and Technology, 1(2), 97-109. https://doi.org/10.33003/86qqyh55

Vancouver

OGUNBAJO KA, UGHEOKE BI, MUHAMMAD ID, ONCHE E. Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion. FUDMA Journal of Engineering and Technology. 2025;1(2):97-109. doi:10.33003/86qqyh55

BibTeX
@article{OGUNBAJO2025,
  author = {OGUNBAJO, Kamardeen A. and UGHEOKE, Benjamin I. and MUHAMMAD, Ibrahim D. and ONCHE, Emmanuel},
  title = {Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion},
  journal = {FUDMA Journal of Engineering and Technology},
  year = {2025},
  volume = {1},
  number = {2},
  pages = {97--109},
  doi = {10.33003/86qqyh55}
}
Kostenlos starten →